443092
3
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
PRINCETON CHORUS FRONT PANEL FUNCTIONS
A. INPUT 1-A high impedance, high sensitivity plug-in connection for instruments,
B. INPUT 2-Plug-in connection for instruments. This input exhibits a lower input impedance and sensitivity than INPUT 1
and is useful with active preamp guitars, and will provide a darker tone with passive guitars. Both inputs are identical when
used simultaneously.
C. VOLUME-Adjusts the overall loudness when not in the OVERDRIVE mode. (SEE: M. SELECT and S. FOOTSWITCH).
D. TREBLE-Adjusts the amount of boost (accentuation) or cut (attenuation) in the high frequency range.
E. MID-Adjusts the amount of boost or cut in the mid frequency range.
F. BASS-Adjusts the amount of boost or cut in the low frequency range.
G. REVERB-Adjusts the overall amount of reverberated signal mixed with the original dry signal.
H. GAIN-Adjusts the amount of preamp amplification while in the OVERDRIVE mode. Cleaner sound is achieved at lower gain
settings, high gain settings will produce more sustain and distortion. This control works in conjunction with the N.
OVERDRIVE-VOLUME control to set the overall loudness at the output.
I. MID-BOOST-Activates a special pre-emphasis filter which accentuates mid-range frequencies.
J. LIMITER-Adjusts the amount of compression at high GAIN settings. The compression is activated by distortion in
the preamp, therefore it is not as noticeable at low gain settings.
K. OVERDRIVE INDICATOR-This LED is illuminated when in the overdrive mode.
L. PRESENCE -Adjusts the amount of boost or cut in the upper high frequency range while in the OVERDRIVE mode. This
control occurs post preamp distortion and is useful in adjusting the distortion characteristic from brash, to smooth.
M. SELECT-Activates the OVERDRIVE Mode. NOTE: This switch disables the Channel Select Footswitch and the C.
VOLUME control.
N. VOLUME-Adjusts the overall loudness while in the OVERDRIVE mode.
O. RATE-Adjusts the sweep rate of the chorus generating circuitry. A lower number corresponds to a slower rate of sweep.
P. SELECT- Activates the stereo CHORUS mode. NOTE: This switch disables the Chorus Select Footswitch.
Q. DEPTH-Adjusts the intensity of the chorus effect. A lower setting will introduce a subtle yet distinct effect whereas a higher
setting will create a more dramatic effect. With both the 0. RATE and DEPTH controls set midway or higher, a variety of
vibrato/tremolo type effects can be achieved.
R. CHORUS INDICATOR-This LED is illuminated when the stereo chorus is active. The intensity of the LED is modulated
by the chorus sweep LFO to give a visual indication of the sweep rate.
S. FOOTSWITCH- Plug-in connection for remote footswitch to activate the OVERDRIVE mode and to switch the stereo
CHORUS on and off. For proper operation of the footswitch, both M. OVERDRIVE SELECT and P. CHORUS SELECT
switches should be out. NOTE: Any good quality patch cord will work with the remote footswitch, however a
speaker grade cord is preferable to a coax guitar cord when it’s available.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fender Princeton Sterio Chorus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fender Princeton Sterio Chorus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info