502486
3
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
TECHNICAL DATA
Straight grinder SGF600CE
Input power W 600
No-load speed rpm 12000-26000
Maximum diameter of grinding wheel/disc mm 25
Clip diameter mm 6
A
pprox. weight (without acces.) Kg. 1.5
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at
hand to use when carrying out maintenance on the
indicated parts.
If the machine is used carefully and normal maintenance
is carried out, it will work well for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual. Any other use
of the tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A Start-up switch (Fig.1)
B Clamping nut (Fig.1)
C Speed adjustment (Fig.1)
EQUIPMENT
- Clip, 8 mm
- Fixed spanner 13 mm
- Fixed spanner 17 mm
- Operating instructions
- Safety instructions
- Warranty
SAFETY INSTRUCTIONS
See “Safety Instructions” manual, supplied with this
instruction manual.
WARNING! Do not grind material containing amian-
thus. Working with materials containing amian-
thus/asbestos and/or silica stones produces a dust,
which is harmful to health. Protect yourself from inhal-
ing this dust, in compliance with current regulations on
accident prevention.
For your personal safety, always connect the machine
to a mains supply protected by a differential and ther-
mal cutout switch, in accordance with regulations on
low-voltage wiring sitemaps.
Do not pierce the motor housing as this could damage
the double insulation (use adhesive labels).
Check the work area with a metal detector for hidden
wires, gas and/or water pipes.
Always unplug the machine before carrying out work
on it.
Always stop the machine by switching it off, not by
unplugging it.
WARNING! Before each use, inspect the plug and
lead. Should they need replacing, have this done by an
official service centre.
Always keep the mains lead clear of the working range
of the machine.
Only plug the machine in when it is switched off.
Hold the machine firmly in both hands and in a stable
position.
Verify that the speed marked on the grinding disc or
wheel is equal to or higher than the straight grinder
rated speed.
Ensure that the grinding disc or wheel dimensions are
compatible with the straight grinder.
Abrasive grinding wheels or discs must be handled
and stored with care in accordance with the manufac-
turer’s instructions.
Protect the sanding tool from knocks, blows and grease.
The grinding disc or wheel must be carefully checked
before being used to ensure that it is not damaged or
cracked. All damaged or cracked grinding discs or
wheels must be immediately replaced.
All grinding discs and wheels must be carefully
mounted in accordance with the manufacturer’s
instructions.
The machine should be used for dry cutting and grind-
ing only.
Check that the disc has been properly fitted and se-
cured before using the machine. Start the machine
with no load and run for 30 seconds in a safe position;
if you notice serious vibration or any other defect stop
the machine immediately. This may be a sign of incor-
rect fitting or a badly balanced disc.
Ensure that the part to be worked on is firmly secured
before beginning any grinding or cutting operation.
Never use cutting discs for deburring. Do not subject
cutting discs to lateral pressure.
Beware of shavings that fly off. Hold the tool that so
that sparks fly away from you or other people and in-
flammable materials.
When working on stone, use dust extraction equipment
and wear a mask.
When working with the machine, always wear safety
goggles and ear protection. Other personal protection
equipment such as dust masks, gloves, helmet and
apron should be worn when necessary, along with non-
slip safety footwear. A dust mask is required when the
dust from the material deburred, such as paint or other
coating, is harmful. If in doubt, use safety equipment.
Make sure the vents are free when working with dust. If
they require cleaning, first unplug the machine, do not
use metal objects and avoid damaging internal parts.
Do not touch the sanding/grinding tools when rotating.
WARNING! The wheel keeps moving for a long time
after the machine has been switched off.
BRIEF DESCRIPTION
This straight grinder has been designed to dock, rough
grind or plane metal and stone materials without the
need for a water supply.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti SGF600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti SGF600 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 2,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info