502493
4
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
4
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual.
Any other use of the tool is strictly forbidden.
See safety regulations attached to this statement.
ILLUSTRATIONS
Description (See gures)
1 Saw blade
2 Adjustable footplate
3 Saw blade holder
4 Locking sleeve for saw blade
5 On/Off switch
6 Lock-off button for On/Off switch
7 Handle (insulated gripping surface)
8 Lever
9 Constant electronic speed regulation
BRIEF DESCRIPTION
The machine is intended for sawing wood, plastic, metal
and building materials while resting rmly on the workpiece.
It is suitable for straight and curved cuts. When using the
appropriate bimetal saw blades, it is possible to cut ush to the
workpiece surface. The saw blade recommendations must be
observed. Use only ½” universal shank saw blades. The saw
blade should not be longer than required for the intended cut.
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is
correct: it must be the same as that on the specication
label. Machines with 230 V can also be connected to a 220
V mains supply. Before plugging the tool in, always check
that On/Off switch is functioning normally and returns to Off
when released.
REPLASING/INSERTING THE SAW BLADE
Inserting the Saw Blade
Turn the locking sleeve 4 approx. 90° in the direction of the
TECHNICAL DATA
CHARACTERISTICS RSF120/1010E
Cutting capacity, max.
– in wood, mm
– in non-alloy steel, mm
250
120
Run-out, mm 28
Rated power input, W 1010
Voltage, V 220±10%
Frequency, Hz 50±5%
Stroke rate at no load, min
-1
300-2500
Weight according EPTA-Procedure 01/2003, kg 3,8
Sound pressure level, dB(A) 93
Sound power level, dB(A) 104
Protection class II
arrow and hold. Push the saw blade 1 into the saw blade
holder 3. Release the locking sleeve 4 again. Check the
tight seating of the saw blade. A loose saw blade can fall
out and lead to injuries. For certain work, the saw blade 1 can
also be turned through 180° (with the teeth pointed upwards)
and re-inserted again.
Removing the Saw Blade
Turn the locking sleeve 4 approx. 90° in the direction of the
arrow and hold. Remove the saw blade 1.
OPERATION
Pivoting and Retractable Footplate
Due to its movability, the adjustable footplate 2 adapts to the
required angular position of the surface. Depending on the
saw blade being used and the application, the footplate 2 can
be moved in lengthway direction in three steps.
Move the lever for the footplate 8 and slide the footplate 2
to the required position. Move the footplate lever 8 to initial
position.
Starting the tool
WARNING! Plug the machine in with the switch off.
Pressing On/Off switch will turn the machine on and
releasing it will turn it off again. For continuous operation,
press On/Off switch and lock it in the operating position
using button retainer B. If the On/Off switch is depressed and
released once again, the machine will stop.
Speed regulation
Regulator 9 is located in the upper section of the handle.
Regulator 9 is used to set the required speed. Position A
corresponds to the minimum speed and position F is the
maximum speed.
Electronic regulation can be carried out with the machine
running.
The optimum number of strokes depends on the material and
particularly on the working conditions. The table below allows
to choose optimal speed for various types of materials.
Materials Position of speed regulator
Wood D-F
Steel C-E
Alloy steel C-D
Aluminum C-F
Plastic A-D
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti RSF120-1010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti RSF120-1010 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info