502476
3
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
TECHNICAL DATA
Electro-pneumatic rotary hammer RHF45/1000VET RHF50/1200VERT
Rated power W 1005 1200
No load speed rpm 210-325 210-325
Hammer rate under load /min 1400-2400 1600-2700
Impact energy J 1-8.5 1-14
Chisel adjustment º
12
30 1230
A
dapto
r
SDS - max
45 SDS - max
45
Max.drilling capac. in concrete mm 12-45 12-50
Max.drilling capac. with hollow bit mm 40-100 40-125
Máx.drilling capac. with solid bit mm 19-38 19-40
A
pprox. weight (without accessories) kg 7 7.6
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at
hand to use when carrying out maintenance on the
indicated parts.
If the machine is used carefully and normal maintenance
is carried out, it will work for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual. Any other use
of the tool is strictly forbidden.
ILUSTRATIONS
DESCRIPTION (See figures)
A Dustproof hood (Fig.1)
B Bit holder ring (Fig.1 and 4)
C Auxiliary handle (Fig.1 and 3)
D Unlocking button (Fig.2)
E Mode selection switch (Fig.1 and 2)
F Air vents (Fig.1)
G Brush covers (Fig.1)
H Speed adjustment switch (Fig.1)
I On/Off switch (Fig.1)
J Clamp collar (Fig.1)
K Clamp unit (Fig.1)
SAFETY INSTRUCTIONS
See Safety instructions” enclosed manual, supplied
together with this instruction manual.
Warning! When drilling in amianthus/asbestos and/or
silica stone, the dust produced is extremely harmful to
your health. Wear protection against inhalation of this
dust, in compliance with current regulations on accident
prevention. Follow the insurance company’s safety in-
structions regarding the responsibility of employees.
For your personal safety, always connect the machine
to a mains supply by a differential and thermal cut-out
switch, in accordance with regulations on low-voltage
wiring sitemaps.
Do not perforate the machine casing, as this would
destroy the protective insulation (use adhesive labels).
Always unplug the machine before doing any work on it.
Warning! Before each use, inspect the plug and lead.
Should they need replacing, have this done by an offi-
cial service centre. Only plug the machine in when it is
switched off.
Always keep the lead out of the machine’s working area.
Only plug the machine in when it is switched off.
Do not allow the machine to get wet, nor should it be
used in wet environments.
When using the machine, always wear safety goggles,
gloves and non-slip footwear, and it is advisable to
wear ear protection.
Do not touch the bit when during or immediately
after working, as it becomes very hot and can
cause serious burns.
Hold the machine firmly by the handle and the auxiliary
handle, otherwise the recoil produced could cause the
machine to work imprecisely or even dangerously.
Always use the auxiliary handle.
Never attempt to clean off dust or shavings resulting
from drilling when the machine is operating.
Do not use diamond core bits.
When drilling walls, ceilings or floors, take care to
avoid electric wires and gas or water pipes.
BRIEF DESCRIPTION
A pneumatic percussion unit generates the power nec-
essary for hammer drilling or chiselling on masonry.
Just when we hit a conventional chisel with a hammer, a
free piston strikes the bit or chisel, which can move
lengthways, through an intermediate part. This free
piston is driven by a second piston activated by an
electric motor through an air cushion. This electro-
pneumatic principle offers great percussion elasticity and
work free from recoil.
Unlike a normal hammer drill, the drilling capacity does
not depend on the pressure exerted on the machine.
Use of the machine:
RHF models can be used for percussion drilling and
chiselling in stone.
Any use differing from the above mentioned is strictly
forbidden.
Additional features of the electro-pneumatic hammer:
- The machine is equipped with a safety clutch or mecha-
nism, which operates when a bit seizes up, protecting
the user and the machine’s electro-mechanical parts.
The clutch is released automatically.
- Warning! This machine must not be used with hole
saws, core bits, diamond bits, etc., as they tend to jam
in the hole easily. This would cause the safety clutch to
trip out too often.
- Toolholder B for hammer drilling with SDS-max
mount for using tools with SDS-max
shanks.
- Electronic speed control of the axle H enables us to: use
smaller bits with no danger of them breaking, drill light
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti RHF50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti RHF50 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info