502483
5
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
5
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A Push button (Fig.1)
B Trigger switch (Fig.1)
C Spindle blocking button (Fig.1 and Fig.3)
D Auxiliary handle (Fig. 1)
E Guard ange (Fig.2)
F Bolt (Fig. 2)
G Pin spanner (Fig.3)
H Clamping nut (Fig.3)
I Support plate (Fig.3)
J Spindle (shaft) (Fig.3)
K Rear handle turning button (Fig.1)
L Rear handle switch (Fig.1)
EQUIPMENT
- 1 disc guard
- 1 auxiliary handle.
- 1 pin spanner
- 1 support plate and 1 clamping nut
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
This angle grinder has been designed for cutting, deburring
and cutting metals and stone without the use of water.
TECHNICAL DATA
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct:
it must be the same as that on the specication label.
Machines with 230V can also be connected to a 220-V mains
supply.
Before plugging in the tool, always make sure the control
switch A and the trigger B work properly and return to the
“OFF” position when released.
FITTING SAFETY DEVICES
CAUTION! Always unplug the machine before carrying out
work on it. Always work with the guard in place and wear
protective goggles.
1.1. Fitting the disc guard
Insert the guard ange E in the slot in the collar of the machine
plate and turn it to the desired working position.
If the guard does not t in the collar, loosen the bolt F.
CAUTION! When tting, the closed part of the disc guard
should always point towards the user.
1.2. Fitting the auxiliary handle
Use of the auxiliary handle is obligatory in order to ensure
greater control and safety when handling the tool.
The auxiliary handle D must be screwed on to the right or left
side, or on top, depending on the type of work to be carried
out.
Auxiliary anti-vibration handle
The auxiliary handle D is made from a special material
that absorbs the vibrations, which allows you to work in a
comfortable and safe manner.
There is no modication in the auxiliary handle.
Do not use the auxiliary handle if it is damaged.
FITTING THE ACCESSORIES (DISCS AND WHEELS)
CAUTION! For safety reasons, the machine should always be
unplugged from the mains before changing the disc or wheel.
Always work with the guard on and wear safety goggles.
Use deburring and cutting discs with bre-reinforced
synthetic binders, for a max. peripheral speed of 80 m/s and
cup wheels with synthetic binder for 45 m/s.
Protect discs and wheels from knocks and blows.
Angle grinder AF180/1800S AF230/2100S AF230/2300S AF230/2600S
Input power W 1800 2100 2300 2600
Output power W 1170 1370 1500 1700
No-load speed /min 8000 6500 6000 6000
Max. disc diameter mm 180 230
Spindle thread ISO M14
Acoustic pressure dB(A) 95 95 96 95
Sound-power level dB(A) 108 106 109 106
Vibration acceleration m/s² 4,7 7,1 4,9 7,1
Approx. weight (w/o
accessories) according
E P T A P r o c e d u r e
01/2003
Kg. 3.8 5.4 5.4 6.7
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti AF180 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti AF180 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info