502482
5
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
5
TECHNICAL DATA
Angle grinder AF115/900 AF125/900 AF125/1100VES
Input power W 850 850 1100
No-load speed /min 11000 11000 3000-10000
Max. disc diameter mm 115 125 125
Spindle thread ISO M14 M14 M14
Acoustic pressure dB(A) 95 94
Sound-power level dB(A) 108 105
Vibration acceleration m/s² 3,2 9,6
Approx. weight (without acces.) according
EPTAProcedure 01/2003
Kg. 2.1 2.1 2,2
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the machine is used carefully and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A Start-up switch (Fig. 1)
B Auxiliary handle (Fig. 1)
C Disc guard (Fig. 2)
F Spindle (shaft) (Fig.6)
G Spindle blocking button (Fig. 1 and 6)
H Support plate (Fig. 6)
I Abrasive disc (Fig. 6)
J Clamping nut (Fig. 6)
K Pin spanner (Fig. 6)
EQUIPMENT
- Disc guard
- 1 auxiliary handle
- 1 pin spanner
- Disc clamping nuts
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
This angle grinder has been designed for cutting, deburring
and cutting metals and stone without the use of water.
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct:
it must be the same as that on the specication label.
Machines with 230V can also be connected to a 220-V mains
supply.
FITTING SAFETY DEVICES
WARNING! Always unplug the machine before carrying out
work on it.
1.1. Fitting the disc guard
Insert the guard ange D in the slot in the collar of the
machine plate and turn it to the desired working position.
If the guard does not t in the collar, loosen the bolt L.
The guard can be moved manually to the marked posi-tions.
To remove the guard, perform the same steps in reverse
order.
WARNING! The closed part of the disc guard should always
point towards the user.
1.2. Fitting the auxiliary handle
Use of the auxiliary handle is obligatory in order to ensure
greater control and safety when handling the tool.
The auxiliary handle B must be screwed on to the right or left
side, depending on the type of work to be carried out.
FITTING THE ACCESSORIES (DISCS AND WHEELS)
WARNING! For safety reasons, the machine should always
be unplugged from the mains before changing the disc
or wheel. Always work with the guard on and wear safety
goggles.
Use deburring and cutting discs with bre-reinforced
synthetic binders, for a max. peripheral speed of 80 m/s and
cup wheels with synthetic binder for 45 m/s.
Protect discs and wheels from knocks and blows.
WARNING! Never press the blocking button when the
machine is running. The shaft must have stopped com-
pletely before the blocking button is pressed.
To t the disc, proceed as follows (Fig. 6):
1. Block the spindle (shaft) F, by pressing the blocking
button G.
2. With the pin spanner K, remove the clamping nut J from
the spindle F.
3. Fit the abrasive disc on the support plate H.
4. Replace the clamping nut J, using the pin spanner K.
The position of the nut J will depend on the thickness of the
disc (see Fig. 4 and 5).
5. Once the disc is tted, check that the blocking button
has returned to its original position due to movement of the
incorporated spring.
STARTING THE TOOL
WARNING! Check that the mains voltage is the same as that
in the machine’s specications.
Plug the machine in with the switch off.
Start the machine by turning the switch to position 1 (“ON”).
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti AF125 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti AF125 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info