723661
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Installation of Solid State Drive
1. Put the enclosure on a suitable mounting surface with the
LED-Opening pointing downward and the USB-Port to the
right.
2. If possible use a magnetic screwdriver. Loosen the screws on
the side of the USB-Port and remove the cover.
3. Hold the enclosure slightly at an angle and let the circuit
board slide out carefully.
4. If needed put the threaded piece into one of the recesses of
the circuit board to adapt to smaller SSD-formats.
5. Align the edge connector of your SSD on the socket and put it
in. The memorycard should now be angled upwards.
6. Press down the SSD and mount it on the back with the silver
screw.
Formatting the Solid State Drive
1. Right-Click on This PC” icon and select the “Manage column.
2. Select “Disk Management and you will see your SSD showed
“Not initialised” and “Unallocated”.
3. Right-Click on the red Symbol and select “Initialise Disk”.
4. Select “GPT mode. Then press OK button fi nish the initialising
procedure.
5. Right-Click on the “Unallocated” block and select “New Simple
Volume. Then follow up the dialogue box with pressing the
“Next” button until the “Finish” button will start the format-
ting procedure.
6. When formatting is completed, the external SSD will be recog-
nized as a “New Volume”.
7. Make sure that the enclosure is lieing the right way around
by looking at the L-shaped rails and the blue thermalpad on
the inside. Make sure the mounting screw is pointing upwards
and slide the circuit board in with the side with the screw fi rst
until it touches the opposite side. Be sure to have the rails
keep away the circuit board from the thermal pad.
8. Attach the cover with both screws until it sits fl ush.
9. Attention: If the data media is not recognized by your opera-
ting system after installation, it has to be formatted. Note that
in the process all data will be erased and create a backup if
need be.
Removal
1. Loosen the screws on the side of the USB-Port and remove the
cover.
2. Push the circuit board out of the rails so it loosens from the
thermalpad.
Attention: Do not try to remove the thermalpad and avoid
damaging it with the cicuit board or tools.
3. Now the cicuit board can be removed from the enclosure.
Fantec NVMe31
SSD-Memory-Enclosure
Installation Manual
Delivery
External enclosure
1× SSD-mounting-screw
1× Threaded piece for small SSD-Formats
Schraubendreher
Cable USB 3.1 Typ-C to Typ-C
Installation manual
Description
This enclosure supports the installation of a M.2 PCIe NVMe (Key
M or Key M+B) SSD in 2280, 2260 and 2242 format. The connec-
tion to a computer works via USB 3.1.
M.2 AHCI SSDs are not supported.
System Requirements
Windows 7/8.1/10 (32 or 64 bit)
Mac OS 10.14.3 or higher
USB Typ-C-port
Safety Instructions
Protect the product against moisture and direct sunlight
Avoid static discharge during installation
Adress for RMA Sending from Germany
For RMA-Service outside of Germany please contact your dealer!
Fantec GmbH
Department RMA/Service
Billwerder Billdeich 605 B
21033 Hamburg
service@fantec.de
www.fantec.de
Declaration of Conformity
www.fantec.de/unternehmen/bestimmungenrichtlinien/ce
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fantec NVMe31 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fantec NVMe31 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info