71518
54
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
54
WARNING  SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Reassemble in reverse order. When replacing leads refer to the
wiring diagram. Check operation of timer.
7. To Remove an oven Thermostat
Disconnect from the electricity supply.
Remove control panel and hotplate (see 1 & 2). Open oven door.
Remove oven furniture and slide out oven roof liner if fi tted. Pull
cooker forward to gain access to the cover box at the rear of the
cooker. Remove the screws securing the cover and lift clear. The
oven thermostat capillary is clamped to the oven back sheet with
an earthing plate. Remove the screws and plate.
thermostat capillary
earthing plate
Left Hand Main oven
Remove the two screws holding the thermostat phial to the oven
fan cover at the rear of the oven.
Right hand Main oven and Slow Cook oven
Remove thermostat phial cover (2 screws). Unclip the thermostat
phial from the clips on the oven back.
Slow cook oven thermostat phial cover.
Feed the thermostat capillary out of the oven. Disconnect
wiring from thermostat. Remove 2 screws holding thermostat to
mounting panel. Fit new thermostat and reassemble in reverse
order. Ensure that the phial is clipped to the oven back with the
phial centrally positioned between the clips.
Remember to refi t the earthing plate.
Check operation of thermostat.
8. To Change the Grill or Ceramic hob Controller
Disconnect from the electricity supply.
Remove the control panel and hotplate (see 1 & 2). Disconnect
wiring from controller. Remove 2 screws holding controller to
mounting panel. Fit new controller and reassemble in reverse
order. Check for correct operation.
BEFORE SERVICING ANY GAS CARRYING COMPONENTS TURN OFF
GAS SUPPLY.
9. To Change a Hotplate Tap
Disconnect from the electricity supply.
Remove the control panel and hotplate (see 1 & 2).
Unplug the FSD lead from the rear of the tap. Undo compression
tting at the rear of the tap. Remove the fi xings that secure the
tap to the gas rail. Disconnect the ignition switch wiring.
Remove the tap. Remove and discard the gasket seal. Fit new
gasket seal to replacement tap. Re-assemble in reverse order.
Check the appliance is gas sound. Check hotplate ignition.
10. To Change Hotplate Burner Injector
Remove burner cap and head. Remove old jet. Fit new injector.
Reassemble in reverse order. Check appliance is gas sound.
11. To Change Hotplate Burner Electrode
Lift off pan supports, remove burner cap. Remove the screw
holding the electrode. Pull electrode vertically up suffi ciently
to grip the lead between thumb and forefi nger. Pull off the
electrode, but keep hold of the lead. Fit new electrode to the
lead. Fix electrode in burner with screw. Replace burner cap.
Check the burner ignition. Replace pan supports.
12 To Remove or Change a Hotplate Burner.
Remove the hotplate tray (see 2).
The burners except the right hand wok burner are mounted on
support struts. For these burners, disconnect the burner feed
pipes at the burner. Remove the screws at the front and rear
holding the support stru ts. Lift the strut and burners clear. The
burners are fi xed to the support struts with 2 screws. Remove the
appropriate burner and fi t the new one. Reassemble in reverse
order. Check burner operation is satisfactory.
RH Wok burner
Disconnect the burner feed pipes at the burner. Fit the new
one and reassemble in reverse order. Check burner operation is
satisfactory.
13. To Remove an Oven Door
Open the oven door. Loosen the two top hinge screws.
Support the weight of the door and remove the screw nearest
the hinge pin. Swing the hinge up and away from the hinge pin
on the door.
Lift the door away from the bottom hinge.
Re-assemble in reverse order. When replacing the door ensure
that the nylon hinge bush is in position between the hinge pin
and the hinge bracket at the both the bottom and top.
14. To Change Oven Door Outer Panel
Move the cooker forward
to gain access to the sides.
Open the oven door
slightly and remove the
front panel fi xing screws
from the door sides (two
each side).
Carefully lift off the outer door panel.
Remove door handle from panel by unscrewing 2 retaining nuts.
Fit door handle to new panel
Fit panel to door. Reassemble in reverse order.
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Falcon Excel 110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Falcon Excel 110 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Falcon Excel 110

Falcon Excel 110 Gebruiksaanwijzing - Nederlands - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info