665047
3
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
2 Precision Tools Ltd. 2010
Safety Warnings Operating
Instructions
The Planer / Sander is designed to be used either as a
conventional hand held powered planer, or as a hand held
powered drum sander. These instructions give details on how
to set the tool for both functions.
As with all power tools this tool is powered by electricity, has
exposed rotating parts, makes noise and creates dust. To
ensure personal safety and the safety of others it is essential
that the user reads and fully understands these instructions
and then considers and assesses the dangers carefully before
use. If the user does not fully understand how to use the tool,
or does not feel confident, they should seek instruction from a
suitably trained professional before use.
WARNING ! Wait for the cutter to stop before setting
the tool down. An exposed cuttermay engage the surface
leading to possible loss of control and serious injury. Use the
workstand provided.
Setting the Sanding Cutting Depth
The sanding depth can be set to anywhere up to a maximum
indicated setting (approx. 0.5mm). When using the tool as a
sander it is not recommended to set the depth greater than the
maximum indication on the top of the sander depth scale. For
a high quality finish using less effort, make several shallow
passes. Use a lower cutting depth when working with harder
materials.
a) Identify the sanding depth scale (See Illustrated
Description of Functions)
b) Turn the depth adjuster knob fully anticlockwise until
the arrow lines up with indicator pointer
c) Turn the knob clockwise until the required depth is
achieved
WARNING! In sanding mode the drum will always
remain slightly proud of the base plate even when the arrow
indicates a minimum setting.
Changing Sanding tubes
Sanding tubes are supplied (depending on kit) with varying
grit finishes. These can be changed depending on the
amount of sanding to be carried out & level of surface finish
required. Tubes can be changed by following the
procedure.
a) Unplug the tool from the electricity supply.
b) Remove the end cap screws using the Torx key
provided
c) Pull end cap away from side of machine to expose
the tube
d) Using the small spanner to hold the shaft, place the C
spanner into the slots and release (Diagram A)
e) Remove the locking nut and tube assembly
f) Remove the drum end cap which should come away
from the assembly without resistance
g) Remove the drive end cap by pushing it through the
middle of the sanding tube. This part is held in-situ by
a rubber grip ring (Diagram B)
h) Replace with another tube and re-assemble
List of contents
1 x Planing / Sander
1 x Fence guide
2 x Keys
1 x Vacuum adapter
1 x Removal tool
1 x Dust bag
Spare sanding tubes
(dependant on kit)
1 x Blade setting gauge
1 x Ear plugs
1 x Instruction manual
1 x Case
2 x Spanners
1 x Dust mask
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Exakt SP-180 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Exakt SP-180 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 0,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info