17. Only spray clean water. If you spray water that may contain, for
example, sand (from a well or similar source) an extra filter must be
installed.
DESCRIPTION
1. On/off switch
2. Water outlet
3. Water inlet
4. Turbo-lance (only Force 1400)
5. Handle
6. Trigger
7. Handle lock
8. High-pressure hose
9. Lance extension
10. Jet lance
11. Cable hook
12. Electrical cable
This high-pressure cleaner was developed for household use, such as the washing/spraying of cars,
boats, terraces, small walls, etc. So use it exclusively for this type of work and not for (excessively)
heavy and/or industrial purposes!
The machine contains a number of components, including a pump in a shock-absorbing housing – the
handle has an anti-slip profile.
You can spray cold and lukewarm water to a maximum of 40°C. Hotter water can damage the pump. Do
not use water that contains dirt, sand or chemicals – this may damage the machine and the operation
and shorten the life span of the machine.
The safety regulations specified elsewhere in this booklet must be taken into account at all times in order
to prevent damage to the machine and the surface to be cleaned and personal injury.
ASSEMBLY
Place the cleaner as close as possible to the water supply.
The cleaner must be placed upright on a robust, flat and
horizontal surface (handle on top).
Insert the end of the lance extension completely into the
handle (A) and secure it with a quarter turn (B). Then fasten
the connection by tightening the coupling nut. See diagram 1.
Fasten the jet lance to the lance extension by inserting the
end of the jet lance completely into the lance extension and
