783509
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
98
Using your Smart KettleEspressions Quiet Shield®
The Espressions Smart Kettle features the
Espressions Quiet Shield® which is new and
exclusive quietboil technology designed to make
boiling water a peaceful practice.
The Espressions Quiet Shield® is a stainless steel
disk attached to the kettle floor which acts as
a diffuser plate. It is perforated with a range of
holes which help disperse, and reduce the size of,
the water bubbles thus significantly reducing the
noise of the boiling process.
Maintaining the Quiet Boil Technology.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible but phosphate scale isn’t generally visible
although may cause the water to appear cloudy
when heated.
Regular use of the kettle can lead to the build-up
of these minerals which reduces the effectiveness
of the Espressions Quiet Shield® as well as the
performance of the kettle.
It is important to descale your kettle regularly to
maintain the Quiet Shield® and to prolong the life
of the kettle.
Espressions recommend that the kettle is descaled
every 4-6 weeks. Go to page 10 for more
information on how to descale your Espressions
Smart Kettle.
Before using your kettle.
It is recommended that you clean your kettle
before using it by filling the kettle with water to
the maximum level indicator, boiling the water
and discarding.
Important: Do not fill the kettle over the maximum
level, as water may spill out of the spout when
boiling.
1. To fill the kettle, remove it from the power
base and lift the lid, by pressing the button at
the top of the handle.
2. Fill the kettle with the desired amount of water.
Always fill the kettle between the minimum
and maximum marks. Do not fill the kettle
below the ‘min’ indication because too little
water may result in the kettle switching off
before the water has boiled because of the boil
dry protection safety feature.
3. Push the lid closed firmly until it locks into
position.
4. Place the kettle onto the power base. Plug
the power cord into a 230-240 Volt AC power
outlet and switch the power on.
Note: If the kettle is not positioned on top of the
power base correctly the LCD panel will show
‘--:--°C’ and Current Temp before going into sleep
mode.
Using your Espressions Smart Kettle
Tip: The Espressions Smart Kettle has five
optimum tea temperatures you can select from:
80°C, 85°C, 90°C, 95°C and 100°C (Just Boil).
Refer to the ‘Tea Brewing Styles and Tips’ table
on page 11 for the ideal water temperature for
your tea.
Note: The temperature settings are a guide only
and may vary depending on personal preference.
1. All the buttons are one touch buttons. Select
the temperature you require by pressing the
specified button and the heating cycle will
activate immediately. The temperature button
you have selected will light up and all the other
buttons will not be illuminated.
If nothing has been selected after 30 seconds
the buttons will cease to be illuminated. After 10
minutes of nothing being selected the LCD screen
will go into sleep mode.
Note: During sleep mode the kettle consumes
less than 0.5W.
2. When the heating cycle is initiated, the LCD
display will show the estimated amount of
time required to reach the selected water
temperature. The Time to Boil feature shown
on the LCD display will count down until the
selected temperature is reached at which
point the kettle will beep. The kettle will
automatically turn off once temperature has
been reached.
3. During the heating cycle the LCD panel will
display the increasing temperature and the
number of minutes and seconds remaining
until the selected temperature is reached
4. The kettle will beep once when the selected
water temperature has been reached.
Note: To cancel the heating process at any time
during the boiling cycle, simply press the selected
temperature button once or remove the vessel
from the base.
Note: If the kettle is removed from the power
base during the heating process, the kettle will
automatically reset, cancelling the heating cycle.
40° / Sterilise feature
1. To select the 40°C feature press the button
once. The water is heated to 40°C.
Note: The ESTIMATED TIME to boil will not
be shown when 40°C is selected because it is
dependent on how much water is in the kettle
Note: To ensure the water temperature does not
exceed 40°C the heating process is purposely
intermittent and therefore it could take a few
minutes to get to this temperature
2. To select the Sterilise feature press and hold
the button for 1 second. The sterilisation feature
heats the water to 100°C and maintains a rolling
boil for 5 minutes. When the sterilisation
feature is activated the LCD screen will display
‘STERILISE CYCLE’.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Espressions EP9650 Smart Kettle bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Espressions EP9650 Smart Kettle in de taal/talen: Engels als bijlage per email.

De handleiding is 0.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Espressions EP9650 Smart Kettle

Espressions EP9650 Smart Kettle Gebruiksaanwijzing - Nederlands - 16 pagina's

Espressions EP9650 Smart Kettle Gebruiksaanwijzing - Deutsch - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info