617680
142
Verklein
Vergroot
Pagina terug
1/197
Pagina verder
Messages What to do
SP Connection Error
See manual and reconnect cables
of SpectroProofer Mounter to
printer.
The optional SpectroProofer mounter (from here on, mounter) is not installed on the
printer correctly. Turn off the printer, and then reconnect the cables of the SpectroProofer
mounter correctly. Turn on the printer again after a short pause.
See the manual supplied with the mounter for more information on connecting cables.
SProofer Disconnected
SpectroProofer Mounter is not
recognized. Continue?
The mounter is not connected to the printer correctly. Connect the cables of the mounter
correctly, and then select No to turn off the printer. Turn on the printer again after a short
pause.
See the manual supplied with the mounter for more information on connecting cables.
If you do not want to use the mounter, select Yes.
ILS30EP Error
See manual and reconnect ILS30EP
to SpectroProofer Mounter. Turn
printer off and on again.
The optional color measurement device ILS30EP (from here on, ILS30EP) is not installed on
the mounter correctly. Turn off the printer, and then reconnect the cables of the ILS30EP
correctly. Turn on the printer again after a short pause.
See the manual supplied with the ILS30EP for more information on connecting cables.
ILS30EP Disconnected
ILS30EP is not recognized.
Continue?
The ILS30EP is not connected to the printer correctly. Connect the cables of the ILS30EP
correctly, and then select No to turn off the printer. Turn on the printer again after a short
pause.
See the manual supplied with the ILS30EP for more information on connecting cables.
If you do not want to use the mounter, select Yes.
SpectroProofer Error
See documentation for how to
solve the problem.
NN (where NN is the error number)
The solution depends on the error number. See the following table.
U “SpectroProofer Error” on page 142
SpectroProofer Error
If SpectroProofer Error is displayed, see the two numbers at the end of the error number for the solution. See the
manual supplied with the mounter for more information on removing, cleaning, and installing, the mounter.
If this message appears on the LCD panel again, contact your dealer or Epson Support.
U See “Where To Get Help” on page 185
Error Number What to do
01 The mounter is not installed correctly. Turn off the printer, remove the mounter, and then
install it again.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Problem Solver
142
142

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-P7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-P7000 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson SureColor SC-P7000

Epson SureColor SC-P7000 Installatiehandleiding - Nederlands - 34 pagina's

Epson SureColor SC-P7000 Gebruiksaanwijzing - Nederlands - 210 pagina's

Epson SureColor SC-P7000 Installatiehandleiding - Deutsch - 34 pagina's

Epson SureColor SC-P7000 Gebruiksaanwijzing - Deutsch - 214 pagina's

Epson SureColor SC-P7000 Installatiehandleiding - English - 34 pagina's

Epson SureColor SC-P7000 Gebruiksaanwijzing - Français - 215 pagina's

Epson SureColor SC-P7000 Installatiehandleiding - Français, Italiano, Português, Espanõl - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info