617680
114
Verklein
Vergroot
Pagina terug
1/197
Pagina verder
Menu Descriptions
Maintenance
Item Description
Nozzle Check Press the Z button to print a nozzle check pattern. Inspect the pattern
visually and perform head cleaning if you detect faint or missing colors.
U “Checking for clogged nozzles” on page 126
Head Cleaning Select the combination of ink colors for head cleaning, and the strength of
the cleaning. Only use this menu when nozzles are clogged.
U “Cleaning the print head” on page 126
Combination of ink colors to be cleaned
Check the ink colors with faint or missing segments in the check pattern,
and then specify which nozzles to clean. The displayed items differ
depending on the printer model and ink sets being used.
If there are faint or missing segments in all colors: Select All
Nozzles.
If there are faint or missing segments in only a few colors: Select the
specific ink colors you want to clean. You can select multiple items at
the same time.
Cleaning strength
Normally, select Normal. If nozzles are clogged even after performing
Normal head cleaning several times, perform Heavy cleaning.
All Nozzles Normal
Heavy
XX/XX Normal
Heavy
Head Alignment Perform print head alignment when setting up the printer for the first
time, and after moving or transporting the printer. Perform print head
alignment when the print results look grainy or out-of-focus. Normally,
select Auto.
U “Adjusting print misalignments (Head Alignment)” on page 129
Auto: The printer reads adjustment patterns using the sensor while
printing the patterns, and makes adjustments automatically.
Manual: The printer prints a pattern; inspect the pattern visually and enter
the value you think appropriate. Use this if you cannot perform auto
adjustment, or if you are not satisfied with the adjustment results when
using Auto.
Auto Uni-D, Bi-D 2-color,
Bi-D All Color, Bi-D
#1 to #4
Manual Uni-D, Bi-D 2-color,
Bi-D All Color
Cutter Maintenance Make settings for the printer's built-in cutter.
Adjust Cut Position -3 to 3mm You can fine tune the cut position when printing to roll paper with no
margins in all directions. The cut position can be adjusted in increments of
0.2 mm.
Replace Cutter Moves the cutter to the replacement position so it can be replaced. Press
the Z button to move the cutter to the replacement position. The paper
must be removed before the cutter can be replaced. Remove the paper
before proceeding.
U “Replacing the Cutter” on page 135
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Using the Control Panel Menu
114
114

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-P7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-P7000 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson SureColor SC-P7000

Epson SureColor SC-P7000 Installatiehandleiding - Nederlands - 34 pagina's

Epson SureColor SC-P7000 Gebruiksaanwijzing - Nederlands - 210 pagina's

Epson SureColor SC-P7000 Installatiehandleiding - Deutsch - 34 pagina's

Epson SureColor SC-P7000 Gebruiksaanwijzing - Deutsch - 214 pagina's

Epson SureColor SC-P7000 Installatiehandleiding - English - 34 pagina's

Epson SureColor SC-P7000 Gebruiksaanwijzing - Français - 215 pagina's

Epson SureColor SC-P7000 Installatiehandleiding - Français, Italiano, Português, Espanõl - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info