617676
126
Verklein
Vergroot
Pagina terug
1/177
Pagina verder
When RIP Settings is selected
Slow the feed speed of the software RIP.
When 1 to 30 (media setting banks) is selected
Set Feed Speed in the setup menu to Lv1.
B
Check the attachment of the media holding
plates
If a media holding plate is not installed correctly,
media feeding may be disturbed. See the
following reference and reattach the media
holding plates.
U “Loading and Exchanging Media” on
page 30
If installing the media holding plate correctly still
does not resolve the problem, perform the
following measure.
C
Feed Adjustment
Feed adjustment may be required independently
depending on the media used. If the roll width is
different, independent adjustment is required
even with the same media. For more accurate
adjustment, print a test pattern using the
following settings: Manual - 500mm Pattern.
U “Feed Adjustment” on page 68
Stains Due to Head Striking
The media and print head are contacting during
printing.
Perform the following sequence until the print results
have improved.
A
Cut sections of media with wrinkles or waviness
If media is stored inappropriately or left loaded
in the printer, wrinkles and waviness may occur.
If media is used in this state, the print head and
the raised surface of the media may contact and
cause staining. Cut sections with wrinkles or
waviness before using media.
Furthermore, store media as described in the
manual accompanying the printer and load
media in the printer just before printing.
If the problem is not resolved even when printing
on sections without wrinkles or waviness,
perform the following measure.
B
Loading the media in the printer correctly and
configuring the media settings appropriately
If the media loading method, heating
temperature, tension, suction and other settings
are inappropriate, wrinkles and waviness occur
on the media. Make sure the loading method and
settings are correct.
U “Loading and Exchanging Media” on
page 30
If the measures above do not resolve the problem,
perform the following measure.
C
Checking that the media is loaded correctly in the
Auto Take-up Reel Unit
If the method to attach the media to the take up
roll core is inappropriate, media may move
around during take-up, which may cause
wrinkles and raised sections.
Make sure media is being loaded on the Auto
Take-up Reel Unit correctly.
U “Using the Auto Take-up Reel Unit” on
page 46
D
Set the after heater temperature correctly.
Adjust the after heater temperature to suit the
media.
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Problem Solver
126
126

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-F7200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-F7200 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson SureColor SC-F7200

Epson SureColor SC-F7200 Installatiehandleiding - Nederlands - 44 pagina's

Epson SureColor SC-F7200 Gebruiksaanwijzing - Nederlands - 189 pagina's

Epson SureColor SC-F7200 Installatiehandleiding - Deutsch - 44 pagina's

Epson SureColor SC-F7200 Gebruiksaanwijzing - Deutsch - 189 pagina's

Epson SureColor SC-F7200 Installatiehandleiding - English, Français, Italiano, Português, Espanõl - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info