617676
66
Verklein
Vergroot
Pagina terug
1/177
Pagina verder
Take-up Tension (SC-F7200/
SC-F7100 Series only)
Take-up Tension has 2 settings: Auto and Manual.
The default setting of Auto is recommended in most
situations. If media wrinkles when printing, or white
banding (white or light lines) appears in the print
results, we recommend using Manual and setting the
value to lower than Lv3. Make the same settings if ink
adheres to the back of the take-up roll. If thick media
cannot be wound correctly, we recommend using
Manual and setting the value to higher than Lv3.
If you have previously performed Feed Adjustment, you
will need to perform it again after adjusting Take-up
Tension.
U “Feed Adjustment” on page 62
A
Use the d/u buttons to select Take-up Tension
and press the Z button.
B
Use the d/u buttons to select the item you want
to change.
Selecting Auto
(1)
Select Auto and press the Z button.
(2) Confirm that the checkbox has been selected
and press the Z button.
(3)
Press the y button to return to the customize
settings menu.
Selecting Manual
(1)
Select Manual and press the Z button.
(2)
Use the d/u buttons to set the recommended
value.
(3)
After finishing the configuration, press the Z
button.
(4)
Press the y button twice to return to the
customize settings menu.
Media Tension (SC-F7000 Series only)
We recommend setting Media Tension to the value
below that complies the width of the loaded media. The
value depends on the Tension Measurement setting.
A: Value of Media Tension (when Tension
Measurement is Periodically/Every Page)
B: Value of Media Tension (when Tension
Measurement is Off)
Recommended values for Media Tension by media
width
64 52 44 42 36 24
A
Lv28 Lv23 Lv19 Lv19 Lv16 Lv11
B
Lv39 Lv32 Lv27 Lv26 Lv22 Lv15
If you have previously performed Feed Adjustment, you
will need to perform it again after adjusting Media
Tension.
U “Feed Adjustment” on page 62
A
Use the d/u buttons to select Media Tension
and press the Z button.
B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Feed Speed
Auto is displayed for the SC-F7200 and SC-F7100 Series
only. The default setting for the SC-F7200 and
SC-F7100 Series is Auto. The default setting for the
SC-F7000 Series is Lv2. The manufacturer default set
value is recommended in most circumstances. Set Lv1 if
thin media is creased or torn or sticks together or
horizontal lines appear during printing. To increase the
printing speed, set Lv2. Note that the speed does not
change when a large number (of passes) was selected.
A
Use the d/u buttons to select Feed Speed and
press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
C
After finishing the configuration, press the Z
button.
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Basic Operations
66
66

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-F7200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-F7200 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson SureColor SC-F7200

Epson SureColor SC-F7200 Installatiehandleiding - Nederlands - 44 pagina's

Epson SureColor SC-F7200 Gebruiksaanwijzing - Nederlands - 189 pagina's

Epson SureColor SC-F7200 Installatiehandleiding - Deutsch - 44 pagina's

Epson SureColor SC-F7200 Gebruiksaanwijzing - Deutsch - 189 pagina's

Epson SureColor SC-F7200 Installatiehandleiding - English, Français, Italiano, Português, Espanõl - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info