617674
78
Verklein
Vergroot
Pagina terug
1/101
Pagina verder
Problem Solver
When a Message is Displayed
If one of the following messages is displayed, read and follow the instructions below.
Messages What to do
Prepare empty waste ink bottle. The waste ink bottle is getting full. Ready a new waste ink bottle.
U “Options and Consumable Products” on page 85
Chip Unit Error
Chip unit not recognized. Reattach
or replace.
Remove and reinsert the chip unit. If the same error still occurs, replace with a new
chip unit.
U “Chip Unit Replacement and Ink Refills” on page 61
Condensation may have formed inside the tank. Keep at room temperature for at
least 4 hours.
U “Notes on Handling Ink Packs and Ink Tanks” on page 19
Chip Unit Error
Chip unit cannot be recognized.
Refill after matching ink pack with
label?
Use only the chip units from specified Epson ink packs.
You cannot use unspecified Epson ink packs.
U “Options and Consumable Products” on page 85
Chip unit expended. Chip unit is nearing end of service life. Obtain an ink pack of the appropriate color as soon
as possible.
U “Options and Consumable Products” on page 85
U “Notes on Handling Ink Packs and Ink Tanks” on page 19
Command Error
Check print settings on RIP.
Press W and select Job Cancel. Check that the installed software RIP is compatible with
the printer.
Unit Matching Error
Check combination of Media
Feeding Unit and Auto Take-up
Reel Unit.
Then restart printer.
The standard media feeding unit is used only with the standard auto take-up reel unit, the
heavy roll media feeding unit only with the heavy roll auto take-up reel unit. If you have
mismatched the feeding and take-up reel units, turn the printer off and install the correct
equipment.
U Setup Guide
U Heavy Media Roll System Setup Guide
F/W Install Error
Firmware update failed.
Restart the printer.
Turn the printer off, wait for a few minutes, and then turn on the printer again.
Use EPSON LFP Remote Panel 2 to update the firmware again.
If this message appears in the control panel again, contact your dealer or Epson Support.
Auto Take-up Reel Unit stopped. Media is not correctly attached to the auto take-up reel unit.
Press the W button and select Job Cancel to cancel printing.
Flip the Auto switch on the auto take-up reel unit to Off, then flip it back and reattach the
media to the auto take-up reel unit.
U “Media Loading and Take Up” on page 35
SC-F7000 Series User’s Guide
Problem Solver
78
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson SureColor SC-F7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson SureColor SC-F7000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson SureColor SC-F7000

Epson SureColor SC-F7000 Installatiehandleiding - Nederlands - 40 pagina's

Epson SureColor SC-F7000 Gebruiksaanwijzing - Nederlands - 110 pagina's

Epson SureColor SC-F7000 Installatiehandleiding - Deutsch - 40 pagina's

Epson SureColor SC-F7000 Gebruiksaanwijzing - Deutsch - 112 pagina's

Epson SureColor SC-F7000 Installatiehandleiding - English, Français, Italiano, Português, Espanõl - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info