37861
24
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
24 Solving Problems
Problems and Solutions
Check the solutions below if you are having
problems using the product.
Setup problems
The product makes noise after you turn it on.
Make sure the protective tape is not blocking the
print head. After releasing the print head, turn
off the power, wait a moment, then turn it back
on.
The product makes noise after ink cartridge
installation.
When you install ink cartridges, the ink delivery
system must be charged. Wait until charging is
finished, then turn off the product. If you turn it
off too soon, it may use extra ink the next time
you turn it on.
Make sure the ink cartridges are seated securely
and no protective material remains in the
product. Open the cartridge cover and push the
cartridges down until they click into place. Turn
off the power, wait a moment, then turn it back
on.
A screen that prompts you to restart the computer
did not appear after finishing the software
installation.
The software has not been installed correctly.
Eject and insert the CD-ROM, and then install
the software again.
Printing and copying problems
The product is on, but nothing prints.
Run a nozzle check (& “Checking the print
head” on page 20). If nothing prints, you may
need to clean the print head.
The product makes printing sounds, but nothing
prints.
The print head nozzles may need cleaning
(& “Checking the print head” on page 20).
Make sure the product is on a flat, stable surface.
The margins are incorrect.
Make sure your original is positioned in the top
left corner of the document table.
If the edges of the copy are cropped off, move the
original away from the corner slightly.
Make sure the paper size settings are correct for
the paper you have loaded.
Make sure your paper is loaded short edge first,
all the way to the right, with the left edge guide
lightly against the paper (& “Loading Paper” on
page 8).
Do not load paper above the c arrow mark
inside the left edge guide (& “Loading Paper” on
page 8).
Blank pages are printed.
Make sure the paper size settings are correct for
the paper you have loaded.
The print head nozzles may need cleaning
(& “Cleaning the print head” on page 20).
Paper feed problems
Paper does not feed correctly or is jammed.
If paper does not feed, remove it from the sheet
feeder. Fan the paper, load it against the right
side, and slide the left edge guide against the
paper (but not too tightly). Make sure the paper
is not in front of the feeder guard.
Do not load paper above the c arrow mark
inside the left edge guide (& “Loading Paper” on
page 8).
If paper is jammed, the b Error light flashes.
Follow these steps to clear the jam:
1. Press the x Start E [Color] button to eject the
jammed paper. If the jammed paper is not
ejected, go on to the next step.
2. If the paper is stuck near the sheet feeder or
output tray, gently pull it out then press the
x Start E [Color] button.
If the paper is stuck inside the product, press the
P On button to turn it off. Open the scanner unit
and remove any paper inside, including any torn
pieces. Do not pull it backward; this can damage
the sheet feeder. Close the scanner unit, then
turn the product back on.
If paper jams frequently, make sure the left edge
guide is not pushed too tightly against the paper.
Try loading fewer sheets of paper.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Epson-Stylus-DX5000

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson Stylus DX5000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson Stylus DX5000 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 1,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson Stylus DX5000

Epson Stylus DX5000 Gebruiksaanwijzing - Nederlands - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info