589524
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Use low pressure water
to wash the device.
Contact points
Contact marks
12. Service and Repair
Go to
www.epson.eu/runsense
for service contact details.
Looking after your Device
To clean the device, wash the contact points lightly with tap water, wipe away most of the water
with a towel, and then let it dry naturally.
If charging or communicating becomes unstable, clean the contact points on the device and the
cradle with a damp cotton swab.
Do not use any cleaning products on this device.
Option
You can purchase the following optional extras. Contact your local dealer for more information.
AC adapter Model No. : SFAC02(Conti) / SFAC03(UK)
Heart Rate Monitor Strap Model No. : SFHRM01
Resetting the System
You can reset the system by following the below steps.
Hold down all of the buttons ( / / / ).
The screen is reset and the device restarts.
Initialise the device after restarting.
“2. Charging and Initial Settings”
Setting data and measurement data remain as they were before the reset was performed.
The time screen will automatically be updated the next time a GPS signal has been
received.
Goal function
This function allows you to measure until the time or distance set in advance is reached.
Time race
Allows you to set a time as your goal and measure the time taken until that goal is reached. You can
exercise while checking the elapsed time. You can also calculate the estimated distance until the goal is
reached.
Distance race
Allows you to set a distance as your goal and measure the time taken until that goal is reached. You can
exercise while checking the distance. You can also calculate the estimated time.
1. Display the measurement screen.
Press on the time screen. GPS positioning starts, and the measurement screen is displayed
once positioning is complete.
2. Displays the Measure set. menu.
Hold down on the measurement screen.
3. Select Mode.
4. Select Goal.
5. Select whether to set Time or Distance.
6. Set the Time or Distance.
7. Select OK.
8. Press to start measuring.
When the set time or distance is reached, the “Finish” screen is displayed.
An alarm noties you when you reach 50% and 90% of the set time or distance.
Set the “Estimated Time or “Estimated Distance in your screen settings to view and keep track of your
progress. For more details, see the User Manual.
Measure set.
You can set the following measurement related functions from the Measure set. menu.
To open the Measure set. menu, hold down
on the measurement screen before you start recording.
Setting items Value Explanation (The initial settings are underlined)
Activity Type
Run, Walk, Bike Select the Activity Type you want to measure.
Mode Set the Mode to suit the measurements you want to make.
Chronograph Chronograph mode allows you to measure split times and
lap times (section measurement) simultaneously.
Interval Interval mode allows you to switch between hard (sprint)
or light (recovery) exercises, and repeat using the specic
distance or time set in advance.
Goal Goal mode measures until the time or distance set in
advance is reached.
GPS - Displays the number of GPS satellites being accessed.
AT Lap
SETTING 01-05
OFF
This function records laps automatically, when a time or
distance set in advance is reached. You can set ve times or
distances.
AT Pause
ON
OFF
This function automatically stops measuring when you stop
running, and resumes when you continue running.
Target Pace
SETTING 01-03
OFF
Set the target time and pace range for the distance. An alarm
sounds if you are outside the set pace range. You can set three
target paces.
Waypoint ON
OFF
Store the waypoint that you want to reach from the current
position. An alarm sounds if you reached the waypoint..
HR*
1
Zone 1-5
OFF
You can measure your heart rate by wearing the Heart Rate
Monitor Strap (optional). We recommend using the optional
Heart Rate Monitor Strap (Model No.: SFHRM01)
Tap*
2
(Only for the
measurement screen)
Lap, Light, Screen
Chg., OFF
You can perform one of the operations set here by tapping
the screen while measuring.
Screen Screen 1-4
Display Lap Screen
You can display up to four measurement screens. You can
change the screen pattern and the measurement items
displayed for each screen.
You can also change the Lap Screen, but this is not displayed
for the interval function.
*1 Displayed after registering the Heart Rate Monitor.
*2 Only displayed for the SF-710/SF-510.
Settings
You can set the following device related functions from the Settings menu.
To open the Settings menu, hold down
on the time screen.
Setting items Value Explanation
Comm. Settings HR Monitor
Smart Phone
Register the Heart Rate Monitor and the
smartphone to this device.*
1
User Settings Height, Weight, DOB, Gender, HR
Zone*
1
Set the user information.
Sys. Settings Language, Units, Clock, DST, Time
Adjust, Time Zone, Date Format,
Invert Disp., Contrast, Auto Sleep,
AT Light, Alarm, Key Tones, Initialize,
Software Version
Make settings for the device's system.
*1 For more information on the Heart Rate Monitor and smartphones, download the User Manual from
the following Epson website. www.epson.eu/runsense
8. Settings Table
9. Introduction of the main function
11. Other Features described in the User Manual
10. Maintenance
How to set a time and distance for hard and light workouts (Interval Function)
How to set and measure the target time for one kilometer (Target Pace function)
How to monitor your heart rate with the Heart Rate Monitor (Heart rate function)
How to communicate with external devices (Communication function)
How to set the Tap Function to display a set function (Tap function: SF-710/SF-510 only)
How to set the device to turn on the light automatically when the screen changes (AT Light function)
For more information on each of the functions mentioned above, download the User Manual from
the following Epson website.
www.epson.eu/runsense
Installing the Run Connect
This device allows you to manage measured data using a dedicated Web application (RUNSENSE
View). To upload measurement data, you need to install Run Connect on your computer and connect
to the Internet.
Install Run Connect before connecting the device to your computer.
1. Access the following website and download Run Connect.
URL https://go-wellness2.epson.com/portal/
2. Run the downloaded le and follow the instructions displayed on the setup
screen.
Creating an Account (When Using RUNSENSE View for the First Time)
1. Connect the cradle with a USB cable to the PC on which Run Connect is
installed.
2. Place the device into the cradle.
Check that the contact points on the device are pointing up and match the contact marks
on the cradle.
Run Connect starts.
3. Click Create Account and enter your details.
Uploading your recorded Data
Connect your RUNSENSE device to the computer. The following box will
automatically appear. Enter your Login ID and Password and click Upload.
View your recorded Data
1. Click Start RUNSENSE View on the Run Connect screen.
Or access the following Web site.
URL https://go-wellness.epson.com/runsense-view/
2. Click the data you want to check from the list.
• For information on using the Web application (RUNSENSE View), see the RUNSENSE View Help.
• For information on linking to other devices, see the User Manual.
AT Lap
When a time or distance set in advance is reached, laps are recorded automatically. Set the lap time or
distance. You can set ve times or distances. However, only one setting can be used while measuring.
1. Display the measurement screen.
Press on the time screen. GPS positioning starts, and the measurement screen is displayed
once positioning is complete.
2. Displays the Measure set. menu.
Hold down on the measurement screen.
3. Select AT Lap.
4. Select one of the No Data from 1 to 5.
5. Select whether to set Time or Distance as the length of the lap.
6. Set the Time or Distance.
7. Press to complete the settings.
8. Hold down again to return to the measurement screen.
9. Press to start measuring.
AT Pause
Measuring stops automatically when you stop running, and resumes when you continue running.
1. Display the measurement screen.
Press on the time screen. GPS positioning starts, and the measurement screen is displayed
once positioning is complete.
2. Displays the Measure set. menu.
Hold down on the measurement screen.
3. Select AT Pause.
4. Select ON.
5. Press to complete the settings.
6. Hold down again to return to the measurement screen.
7. Press to start measuring.
7.
Data Management Using the Web Application (RUNSENSE View)
MEMO
MEMO
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson Runsense SF510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson Runsense SF510 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Epson Runsense SF510

Epson Runsense SF510 Gebruiksaanwijzing - English - 149 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info