511903
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
EPSON PhotoPC 500
The Control Panel
The control panel keeps track of how many pictures have
been taken. It also gives important information about the
status of the battery and various
settings.
resolution
mode
\
pictures taken
I
erase last
/picture
timer
battery level
flash mode
The Control Buttons
You can adjust the following settings using the control
buttons on the top of the camera:
0
Flash
0
Resolution
CI
Timer.
You can also erase the last picture from the camera’s
memory. Flash and resolution settings remain in effect even
after you turn off the camera. However, they return to their
factory settings when you remove or change the batteries.
Flash
The built-in flash has these four settings, which are effective
within a range of 3 to 10 feet:
AUTO
4
Auto
sets the flash to go off automatically
whenever it’s needed (factory setting).
@
Red-eye reduction sets the
flash to blink rapidly
while the picture is being taken. This prevents
the subject’s eyes from appearing red.
0
Flash
off disables the flash even in inadequate
lighting.
5
Forced
flash sets the flash to go off for every
picture.
Resolution
The PhotoPC 500 has the following two resolution settings:
Hi
High
resolution images are captured at
640 x 480; the camera can hold up to 30 pictures
at high resolution. This is the factory setting.
S
Standard
resolution images are captured at
320 x 240; the camera can hold up to 60 pictures
at this resolution.
Timer
The timer sets a lo-second delay between the time the shutter
button is pressed and the image is captured.
Erase
Press the erase button with a small pointed object to erase the
last picture from the camera’s memory.
Connecting the Camera to a PC
Follow these steps to connect the camera to a PC to transfer
pictures:
1,
Press on the arrows on the camera’s port cover and slide up
the cover. (If you have an EPSON PhotoPix LCD monitor
attached to the camera, tilt it up to expose the port cover.)
2.
Line up the arrow on the cable connector with the notch on
the camera’s serial port, as shown. Insert the connector.
3.
Connect the other end of the cable to one of the computer’s
serial ports and tighten the retaining screws.
4.
Turn on the camera and the computer system. A line
appears at the bottom of the picture counter on the
camera’s control panel.
Note:
When the camera is connected to the PC, you cannot use the
shutter button or any of the control buttons.
Digital Camera
10/96
EPSON PhotoPC 500 - 3
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson PhotoPC 500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson PhotoPC 500 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info