680498
3
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
ATTENTION!
This contains information, which must be strictly
observed to avoid damage to the door
3
Where ‘left’ and ‘right’ hands are specified, the door
is always viewed from inside the garage looking out-
wards.
These instructions show right hand side parts.
The manufacturer shall not be held liable for damage
or operational faults due to non-compliance with these
installation instructions. For safety, unauthorised
modification or alterations of this door are not permit-
ted. Modification of this door, its operational parts or
GENERAL & INTRODUCTION
DOOR VARIATIONS
This sectional door is supplied with one of two dif-
ferent balancing systems. Most installation steps shown
in these instructions cover these two systems. Where the
steps differ for each balancing system, symbols are shown
to guide you to follow the system supplied with your door.
Please take a minute to familiarise yourself with the sym-
bols (shown below). The clearances required for installa-
tion are also shown.
When installing an electric operator to this door, always
consult the installation instructions supplied with the ope-
rator.
INSTALLATION CLEARANCES REQUIRED FOR EACH BALANCING SYSTEM
*When B = 1900 mm add 100 mm to the depth shown
the attachment of additional door weight will lead
to invalidation of the door guarantee.
The installation of a garage door requires technical
knowledge and skills. The manufacturer shall not be
held liable for any damages or injuries incurred
during installation. If you are in any doubt about
your ability to install this door correctly and safely,
contact a qualified tradesperson.
Prior to installation, this garage door must be stored in a
dry, sheltered place, protected from risk of damage and /
or loss of components.
STORAGE
The fixings supplied with this door are for use in general
brickwork, walls, ceiling, timber, steel and concrete. If
this door is to be installed to any other material or if the
structure is of poor quality, it is the responsibility of the
installer to use suitable, good quality, fixing items. These
are readily available through trade outlets. It is important
to use plugs and fastening screws with washers that are
suitable for the type of masonry involved, with a minimum
screw diameter of 8 mm. An option kit of installation
brackets can be used to fix the wall tracks (require extra
side room 40 mm).
SAFETY
Ensure that the springs of the torsion spring unit are not
damaged during transit, storage or installation.
Important instructions and notes are highlighted as
follows:
They identify operations and information, which must be
strictly observed and followed to avoid endangering per-
sons or damage to the door.
This identifies operations, which must be
strictly observed to avoid endangering
persons.
CAUTION
For your safety, please read these instructions
thoroughly and ensure you understand them
before starting the installation.
These installation instructions are supplied together
with an illustration plan. Please keep both together in
a safe place for future reference .
!
!
Clearances Required
Side
room
Headroom
Manual
Depth*
Manual
Headroom
El-operated
Depth
El-operated
80 150 B+700 150 B< 2250 = 3445
Tension (low headroom) (TEL)
Torsion (front) (TOF)
80 200 B+700 200 B< 2250 = 3445
B> 2375 = 4450
Torsion (rear) (TOR)
80 100 B+800 120 B< 2250 = 3445
B> 2375 = 4450
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Entrematic Superior 42 TOF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Entrematic Superior 42 TOF in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info