682494
78
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
72
Trouble
shooting guide
Problem
Cause
Correction
Reference
Seam
puckering
1.The needle thread tension is too tight.
1.Loosen the thread tension.
Page 19
2.The needle thread is not threaded
correctly.
2.Rethread the machine.
Page 13
3.The needle is too heavy for the fabric
being sewn.
3.Choose a needle to suit the thread and
fabric.
Page 22
4.Shorten stitch length is too long for the
fabric.
4.Make stitch dense.
Page 27
Patterns are
distorted
1.The correct presser foot is not used.
1.Select the correct foot.
Page 73
2.The needle thread tension is too tight.
2.Loosen the thread tension .
Page 19
3.The stitch length is not suitable for the
fabric being sewn.
3.Make stitch adjustment.
Page 27
The machine
jams
1.Thread is caught in the hook.
Remove the upper thread and bobbin
case. Turn the handwheel backwards
and forwards by hand and remove the
thread remnants.
Page 69
2.The feed dogs are packed with lint.
The machine
is noisy
1.Lint or oil have collected on the hook or
needle bar.
1.Clean the hook and feed dog as
described.
Page 69
2.The needle is damaged.
2.Replace the needle.
Page 23
3.Slight humming sound coming from
internal motor.
3.Normal
--
4.Thread is caught in the hook.
Remove the upper thread and bobbin
case. Turn the handwheel backwards
and forwards by hand and remove the
thread remnants.
Page 69
5.The feed dogs are packed with lint.
Uneven
stitches,
uneven feed
1.Poor quality thread.
1.Select a better quality thread.
Page 22
2.The bobbin case is threaded wrong.
2.Remove the bobbin case, the thread
and reinsert correctly.
Page 12
3.Fabric has been pulled.
3.Do not pull on the fabric while sewing,
let it be taken up by the machine.
--
The sewing
machine
doesn't
operate
1.The machine is not turned on.
1.Turn on the machine.
Page 9
2.The Start/stop button was not pressed.
2.Press the Start/stop button.
Page 24
3.The presser foot lifter is raised.
3.Lower the presser foot lifter.
Page 17
4.The Start/stop button was pressed,
even through the foot controller is
connected.
4.Do not use Start/stop button when the
foot controller is con-nected. To use
Start/stop button, disconnect the foot
controller.
Page 24
5.A thread is caught in the hook race.
5.Remove the upper thread and bobbin
case. Turn the handwheel backwards
and forwards by hand and remove the
thread remnants.
Page 69
6.The machine is not plugged in.
6.Connect the power line plug to the
electric outlet.
Page 9
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Empisal EES50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Empisal EES50 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info