1.2 Packaging contents
The following parts need to present:
• EM6560 wireless e-CAM
• Power supply
• UTP network cable
• User manual
• CD-rom with security software and wizard
2.0 Using the e-CAM
A few short and simple steps are necessary to connect and assign the camera, and to
enjoy the use of camera. Use the following steps to connect the camera.
There are two situations possible to assign the camera to the Eminent e-Centre:
assigning the camera to a new e-Cente or assigning the camera to an existing e-
Centre.
2.1 Assign the e-CAM to a new Eminent e-Centre
You assign the e-CAM to a Eminent e-Centre during the e-Centre’s initial installation
process.
1. Connect the e-CAM to a power outlet using the supplied power adapter.
2. Connect the e-CAM to your router or switch using a network cable.
3. The installation wizard of the e-Centre will move along several steps during the
installation process of the e-Centre itself, meaning you can add all your e-
Domotica devices through the e-Centre’s own website ‘http://e-Centre’.
4. At step 8, your camera will be found. Follow the steps shown on the screen.
2.2 Adding the e-CAM to the already installed e-Centre
1. Connect the e-CAM to a power outlet using the supplied power adapter.
2. Connect the e-CAM to the e-Centre using a network cable.
3. Make sure your computer is completely started.
4. Open your computer’s web browser.
5. Type in the web browser’s address bar: ’http://e-Centre’ and press the ‘Enter’ bar
on your keyboard.
6. The e-Centre’s openings screen will be shown.
7. Click ‘Camera control’.
8. Click ‘Search’.
9. Your e-CAM will be found with the corresponding IP-Address and MAC address.
10. Click ‘Assign’.
11. Give the device a name, fill in the e-CAM’s password and give a location to the
camera. Click ‘Test’ to check whether you have filled in the correct e-CAM
