- 4 -
3. Insert the measuring cap into the opening of the jug lid; rotate to lock it in its place.
4. Place the jug lid onto the jug. Align the spout cover with the jug spout and press the lid firmly onto the top
of the jug.
5. Place the jug on top of the motor base and rotate the jug clockwise to have it locked on the motor base.
Make sure the jug handle must be on the front right and the jug sits securely as shown on the above picture.
Note: The appliance is equipped with a safety switch which prevents the appliance from turning on if the
blending jug is not assembled correctly.
6. Put the plug into the appropriate power outlet. All the indicator lights on buttons turn on for 2 seconds and
then turn off, which means the appliance is in standby mode. (If the indicator lights do not turn on, check if
the blending jug is assembled correctly or if the power is connected.)
7. Make sure the spout cover is closed and the measuring cap is locked in the lid before turning on the
appliance.
8. Press the start/stop button and its indicator light turns on, now press the low/medium/high speed button
according to the specific task, or press a program button (ice crushing or Smoothie making button) directly.
Note: To crush ice, add up to 10 ice cubes. If more ice is needed, remove the measuring cap and add ice
cubes one by one through the lid opening. Remember to replace the measuring cap before using the
appliance.
9. The appliance starts working as required and the corresponding button has its indicator light on.
1) To pause the running of the appliance, press the corresponding button and the button’s indicator light
turns off. To continue the running, press the certain speed/program button again.
2) The start/stop button can always be pressed to stop the appliance during operation. Indicator lights on
buttons will be off. Before you press any speed/program button to continue using the appliance, firstly
press the start/stop button again.
3) You can also directly change the speed/program by pressing another button.
10. The appliance will automatically stop working after 2 minutes if the low/medium/high speed button is
pressed or after 1 minute if the ice crushing or Smoothie making button is pressed. The corresponding
button’s indicator light will blink 3 times before it goes out.
11. Using the pulse function:
For quick or delicate blending tasks, press the pulse button and hold it for a few seconds. The button’s
indicator light is on and the appliance works in the highest speed setting. Release the pulse button to
stop operation. The button’s indicator light will be off. Operate several times until the consistency you
want is obtained.
If the pulse button is pressed for more than 2 minutes, the appliance will stop working automatically.
12. When you are finished using the appliance, remove the plug from the outlet to disconnect the appliance
from the power supply.
13. Take the jug off the motor base. Open the spout cover or remove the lid; pour the contents into a suitable
container. Do not store them in the blending jug.
CAUTION
• If there is no operation for 3 minutes, the appliance will be in hibernation. It needs to be activated by re-
rotating the jug into its locked place or re-plugging the appliance. All indicator lights will turn on and off,
then the appliance is ready to be used.
• For each use, the consecutive operation time should not exceed 3 minutes. At least 10 minutes of rest time
are required between two continuous cycles. Let the appliance cool to room temperature before performing
the next operation cycle.
• Some of the tasks that cannot be performed efficiently with the appliance are: beating egg whites, whipping
cream, mashing potatoes, grinding meat, mixing dough, extracting juice from fruits and vegetables.
• The following items should never be placed in the appliance as they may cause damage: bones, large pieces
of solid food, frozen food, or tough food such as turnips.
• The temperature of the ingredients poured into the jug should not exceed 65°C.
