23. To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
24. Do not touch the appliance if it falls into water. Remove the plug from its socket, turn off the appliance
and send it to an authorized service center for repair.
25. Do not plug or unplug the appliance from the electrical outlet with a wet hand.
26. Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause
electric shock.
27. Never leave the appliance unattended during use.
28. This appliance is not designed for commercial use.
29. Do not use the appliance for other than intended use.
30. Do not wind the cord around the appliance and do not bend it.
31. The oil heater may only be used in the upright position.
32. The unit must be positioned away from flammable or easily deformable objects during use.
33. Place the oil heater on the floor at least 100 cm away from the wall and any other objects, such as
furniture, curtains or plants.
34. The surface temperature of the appliance is high; do not touch it, only at the handle.
35. Regarding the information for the assembly of base support, please refer to the below paragraph of the
manual.
36. Do not attempt to open any part of the oil fins.
37. Keep the heater clean. Do not allow objects to enter the ventilation, as this may cause electric shock, fire
or damage the heater.
38. This appliance is intended for household use only. Do not use it outdoors.
PARTS DESCRIPTION
1. Heating elements
2. Handle
3. Indicator light
4. Thermostat knob
5. Power setting switch
6. Wheel base assembly
7. Wheel
ASSEMBLY
1. Assemble the four wheels to the two base shelves.
2. Turn the heater upside down.
3. Position the wheel base assemblies between the end fins.
4. Fix them to the heater using the U-bolts and wing nuts supplied.
5. Tighten the wing nuts.
USING THE APPLIANCE
1. Set the thermostat knob to position “LOW” and the power setting switch to position “0”. Plug in the
appliance.
