FUNCTIONS
This appliance is designed to be a portable storage container for cold or warm drinks and food.
1. AC socket is connected for household power supply (for indoor use) and DC socket is connected for vehicle
power supply (for use in a car).
2. Turn the power switch to the position “Cold”, the appliance starts cooling; turn the power switch to the
position “Warm”, the appliance starts heating.
3. When using AC socket, the two modes “MAX” and “ECO” can be selected. In ECO mode, less energy will be
used but it will take longer to reach colder or warmer temperature. Note that the ECO mode is not available
when using the car power.
4. It’s suggested to put in pre-chilled food and drinks. If drinks are at room temperature it will take 2-3 hours
to completely chill them.
5. The appliance is not designed to heat cold food, only to preserve hot food at a warm temperature. However,
it can heat cooler food given at least 2 hours.
PERFORMANCE
1. Under the environment of 25°C ±2°C, for cooling mode: the temperature difference in middle and lower
parts of the appliance can reach more than 18°C ±5°C at the MAX position. In ECO position, the temperature
difference in middle and lower parts of the appliance can reach more than 10°C.
2. Under the environment of 25°C ±2°C, for heating mode: the appliance can be used to store hot pre-cooked
food and drinks to approximately 55°C ±5°C in middle and lower parts of the appliance.
OPERATION
Important:
Before the first use, wipe the surface of the appliance with a damp cloth to eliminate possible odours, and
dry it completely.
Before using the appliance, first make sure that the power switch is at the position “OFF”.
First turn the power switch to the position “OFF” for at least 30 minutes, then switch between the cooling
and heating modes. Do not directly switch between the cooling and heating mode, otherwise the appliance
may be damaged.
Always keep the ventilation openings clear of obstruction.
When using the heating mode, do not put cans or soft drink into the appliance.
While using car power:
Make sure to turn on the car engine before plugging in the appliance to avoid a power surge that could
result in overheating and a potential fire risk.
1. Turn on the car engine.
2. Insert the 12V DC power cord connector into the back of the appliance.
3. Plug the other end of the 12V DC power cord into the car cigarette lighter.
4. Turn the power switch to your desired mode: “Cold” = cooling mode / “Warm” = heating mode.
5. After use, turn the power switch to the position “OFF”.
While using household power:
1. Plug the 220V AC power cord into the appliance.
2. Insert the other end of the 220V AC power cord into a standard wall outlet.
3. Turn the power switch to your desired mode: “Cold” = cooling mode / “Warm” = heating mode.
4. If need an increased energy efficiency with a limited cooling capacity, switch to the ECO mode.
5. After use, turn the power switch to the position “OFF”.
