362125
7
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
7
PROGRAMMING YOUR
ESPRESSO MACHINE
The Cuisinart
®
Programmable Espresso Maker
has programming capabilities. Based on café
settings, the
single and
double
espresso functions are set at 1.5 and 3.0 oz.
However, by following a few simple steps, you
can pre-program your perfect serving size down
to the ounce.
Programming
Single Espresso
1. Prepare the portafilter holder with the one cup
filter basket (8) and fill with finely ground
espresso (9). Using the tamping tool, tamp
the coffee grinds (10), or use a single pod of
espresso coffee with the pod filter holder.
Secure the portafilter holder to the brew head
(11-12).
2. Place a cup under both pouring spouts.
3. To begin programming press the program
button. The light around the program button
will show a constant blue light.
4. Press the
single espresso button once to
start the espresso pour (13).The light around
the
single espresso button will flash.
5. Allow the espresso to pour until it reaches the
desired level. Once that is reached, stop the
espresso pour by pressing the
single
espresso button. A beep will signify that the
new setting for the
single espresso
operation has been
programmed and
stored in the machine’s
memory.
6. The espresso machine
will then return to
normal operation mode and is ready to make
another espresso at the push of a button.
Programming
Double Espresso
1. Prepare the portafilter holder. Fit it with the
two-cup filter basket (8) and fill with finely
ground coffee (9). Using the tamping tool,
tamp the coffee grinds (10). Secure the
portafilter holder to the brew head (11-12).
2. Place two cups under both pouring spouts.
3. To begin programming press the program
button. The light around the program button
will show a steady blue light.
4. Press the
double espresso button once
to start the espresso pour (14). The light
around the
button will flash.
5. Allow the espresso to pour until it reaches the
desired level. Once that level is reached, stop
the espresso pour by pressing the
double espresso button. A beep will signify
that the new setting for the
double
espresso operation has been programmed
and stored into the machine’s memory.
6. The espresso machine will then return to
normal operation mode and is ready to make
another espresso at the push of a button
Resetting the Factory Settings
To revert to the original factory settings:
1. Press the program button once.
2. Press and hold down the manual button
and program.
3. Continue holding down manual and program
buttons for approximately 3 seconds or until
you hear 2 beeps. When you hear the 2
beeps, the light around the
and
buttons will flash, and after that, the program
light becomes solid. The espresso machine
13
9
10
11
12
8
14
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elta em 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elta em 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info