708985
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
2
ADJUSTMENTS
The LED spotlight heads and the PIR cab be adjusted
vertically and horizontal
The beam angle of
the LED spotlight
heads can be
adjusted by turning
the Lamp Cap Rings
around the LED
spotlight heads.
(1) TEST MODE
Turn the LUX control and the TIME control counter
clockwise to the edge the TEST position.
Turn on the wall switch. The light starts warm-up for
1 minute. During 1 minute warm-up period, the light
will stay on.
Walk through the detection area. The light turns on
when you move and turns off when you stop.
For a smaller coverage area, point the sensor down;
for a larger coverage area, point the sensor up.
(2) TIME ADJUSTMENT
The TIME adjustment controls how long the light will stay
on after the motion has been detected.
About 5 seconds About 12 minutes
(3) LUX ADJUSTMENT
The LUX adjustment determines at what
light level the lighting system will start
operating when you set the sensor to
automatic operation.
(
4)
AU
TOMATIC OPERATION
T
urn on the wall switch. When the sensor detects motion,
the light automatically turns on. The built-in photocell
turns the sensor off and on according to the light level
selected by the LUX adjustment.
(
5)
M
ANUAL OVERRIDE CLICK TWICE
T
o keep the light on regardless of the motion, you can
override the Automatic Operation. Turn the wall switch off
and on twice within 4 seconds. The interval between the
first and second operation must be within 0.5 - 2 seconds.
I
n Manual Override mode, the light will remain on for
around 4 ~ 6 hours despite no motion; then the light will
turn off and the motion sensor will be back to Auto
Operation mode automatically.
U
sers can also set the motion sensor back to Auto
Operation by turning off the wall switch for at least 10
seconds and then turn it back on
Power Requirement
AC 220 - 240V / 50 Hz
LP350512P
LP351012P
2 x 5 Watt = 10 Watt
2 x10Watt = 20 Watt
Standby
0.5 Watt
LED
Cree
Color Temperature (K)
5000K
CRI
>70
Lumen LP350512P @8
Lumen LP351012P @80°
850 lumen
1550 lumen
Beam Adjustment
Beam angle MAX 80°
L70 Life Span (hours)
Up to 30000 hr
Detection Angle
Up to 180° at 2m Height
Detection Range
Up to 12m (39.4ft) at 2m
Height
Sensor Swiveling Angle
Up to 45° Leftward
Up to 45° Rightward
Up to 35° Downward
Light Adjustable Angle
Up to 45
o
Leftward
Up to 45° Rightward
Up to 37.5° Downward
Mounting Height
Recommended 2m
(6.56ft) Wall Mount
Time Adjustment
5 seconds - 12 minutes
Lux Adjustment
30 - 200 Lux
Operation Mode
Off/Auto/Manual override
Warm Up Time
About 60 seconds
Working Temperature
-10°C ~ +40°C;
95%RH max
Protection Class
Class II
Protection Degree
IP44
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro LP3510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro LP3510 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elro LP3510

Elro LP3510 Gebruiksaanwijzing - Nederlands - 2 pagina's

Elro LP3510 Gebruiksaanwijzing - Deutsch - 2 pagina's

Elro LP3510 Gebruiksaanwijzing - Français - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info