708646
3
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
4-2 Setting Up the Host Phone Number
First of all you need to enter the Host Phone Number so that the GSM notification
can function normally. The host phone number refers to the owner’s phone number
that needs to be entered into the alarm panel so that it will recognize SMS
commands sent from the owner’s phone.
Note: The “Show Caller ID” function on the owner’s mobile phone must be turned
on. The alarm panel can then determine if this number is authorized to use SMS
commands.
1. Begin configuration by entering the default configuration PIN code ‘1234
2. On the touch keypad, enter 66 + PARM Key + Owner’s number + PARM key
Note: Do not enter the phone number of the SIM card inside the alarm panel.
3. You will receive an SMS message saying phone number set successfully.
4. Your alarm panel can now be controlled from the smartphone app.
5. Definition of LEDs
LED
Indication
GSM
Status LED
Flashing once every second: Registering with host device
Flashing once every three seconds: Successful registration
with GSM base station
Off: No AC power, alarm panel running on battery
[REC] LED & Key
Flashing: Recording / Listen-In in progress
On: Message playback in progress
[ARM] LED & Key
On: Arm Mode
Flashing: Arm Mode Exit Delay
[PARM] LED & Key
On: Partial Arm Mode
Flashing: Partial Arm Exit Delay
[DISARM] LED &
Key
On: Disarm Mode
Flashing: Waiting for device binding / Test Mode
[ALARM] LED
Flashing: Alarm event triggered
[TEL] LED & Key
On: Using GSM Telephone
Flashing: GSM sending SMS
[RFID] LED
[LEDs around
siren
area]
On: Reading Tag ID
Numbers 1-9
LED & Keys
On: Indicator for sensor zone 1 to 9, or which remote
keyfob 1- 9, or RFID tags 1-4
Number 0
LED & Key
On: Indicator for sensor zone > 9 or RFID tags > 4.
6. Mounting the Alarm Panel
Selecting a suitable location:
Mounted the alarm panel close to the door which you normally use to enter/exit
your house.
Note that the Alarm panel requires a power outlet to function properly.
Ensure the location selected a good GSM signal. You can do this by cross
checking the signal bar on your phone at that location.
The panel must not be co-located or operated in conjunction with any other
nearby transmitter or antenna.
1. Remove the back panel mounting bracket of the GSM and mount the bracket on
the wall using wall anchors and screws.
2. Once secured, ensure the power connectivity and reattach the alarm panel to the
secured mounting bracket.
3. Power on the panel and test to make
sure the GSM has good signal.
Please see Test Mode Point 4.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-AG400011---Home-Alarm-System

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro AG400011 - Home Alarm System bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro AG400011 - Home Alarm System in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elro AG400011 - Home Alarm System

Elro AG400011 - Home Alarm System Snelstart handleiding - Nederlands - 5 pagina's

Elro AG400011 - Home Alarm System Gebruiksaanwijzing - Nederlands - 236 pagina's

Elro AG400011 - Home Alarm System Snelstart handleiding - Deutsch - 5 pagina's

Elro AG400011 - Home Alarm System Gebruiksaanwijzing - Deutsch - 12 pagina's

Elro AG400011 - Home Alarm System Snelstart handleiding - English - 6 pagina's

Elro AG400011 - Home Alarm System Snelstart handleiding - Français - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info