704005
58
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
56
Troubleshooting
Condition Cause Reference
The machine
does not operate.
1. The machine is not been plugged in properly.
2. The power switch is turned off.
3. The safety device is activated.
Refer to page 7.
Turn the power switch ON.
Refer to page 4.
The fabric is
not being fed
smoothly.
1. The presser foot is raised.
2. The foot pressure is too low.
3. The feed dog is packed with lint.
Lower the presser foot.
Refer to page 10
Refer to page 52.
The needle
breaks.
1. The wrong needle is used or the needle is incorrectly inserted.
2. The needle is bent or worn.
3. The fabric is forcibly pulled.
Refer to page 10.
Refer to page 10.
Pull the fabric lightly.
The thread
breaks.
1. The machine is not correctly threaded or the thread is tangled.
2. The thread tension is too tight.
3. The wrong needle is used or the needle is incorrectly inserted.
4. The needle is bent or blunt.
5. A poor quality thread is used.
Refer to pages 19-32.
Refer to pages 37-41 and 45.
Refer to page 10.
Refer to page 10.
Refer to page 15.
Skipped stitches 1. The wrong needle is used or the needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The machine is not correctly threaded or the thread is tangled.
Refer to page 10.
Refer to page 10.
Refer to pages 19-32.
The seam is not
sewn neatly.
1. The thread is not correctly inserted between the tension disks.
2. The thread tension is too strong or too loose.
3. The machine is not correctly threaded or the thread is tangled.
4. The chaining nger is not set correctly.
5. The needle and/or the thread are not suitable for the fabric being
sewn.
Refer to pages 19, 22, 28 and
31
Refer to pages 37-41 and 45.
Refer to pages 19-32.
Refer to page 13.
Refer to pages 33, 42, 46-49.
Seam puckering 1. The thread tension is too tight.
2. The machine is not correctly threaded or the thread is tangled.
3. The stitch length dial and/or the differential feed dial is not
correctly adjusted.
4. The chaining nger is not set correctly.
Refer to pages 37-41 and 45.
Refer to pages 19-32.
Refer to pages 33, 42, 46-49.
Refer to page 13.
The fabric curls. 1. The upper looper thread tension or the lower looper thread
tension is too tight.
2. The chaining nger is not set correctly.
Refer to pages 38-41 and 45.
Refer to page 13.
The fabric is not
cut neatly.
1. The upper knife is deactivated.
2. The upper knife is dull.
Refer to page 12.
Refer to page 54.
The cutting width
is too narrow or
too wide for the
seam width.
1. The cutting width is not adjusted correctly. Refer to page 12.
The looper
threader does not
work.
1. The looper threader switch lever is not set to the “THREADING”
position.
2. The looper selection lever is not set correctly.
3. The thread is not inserted into the looper threader hole 2 cm or
more.
4. The thread is not drawn long enough before it is inserted into the
looper threader hole.
5. The thread is tangled in front of the looper threader hole.
6. The thread is wet.
7. The thread is frayed.
8. Lint is accumulated in the looper threader pipe.
Refer to pages 20, 23.
Refer to pages 20, 23.
Refer to pages 20, 23.
Refer to pages 20, 23.
Refer to pages 20, 23.
Trim the wet thread end.
Trim the thread end.
Refer to page 53.
The needle
threader does not
work.
1. The “ ” mark on the belt cover is not aligned with the “-” mark
on the handwheel.
2. The needle threader switch lever is not set correctly.
3. The needle threader is not used correctly.
Refer to page 30.
Refer to page 30.
Refer to page 30.
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elna eXtend 864 air bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elna eXtend 864 air in de taal/talen: Engels als bijlage per email.

De handleiding is 8,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elna eXtend 864 air

Elna eXtend 864 air Gebruiksaanwijzing - Deutsch - 64 pagina's

Elna eXtend 864 air Gebruiksaanwijzing - Français - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info