614484
85
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
81
Problem
The machine does not run.
The machine is noisy.
The needle thread breaks.
The bobbin thread breaks.
The needle breaks.
Skipped stitches
Embroidery pattern is
distorted or not aligned.
The tread forms loops.
Cause
1. The machine is not plugged in correctly.
2. The threads are jammed in the hook or
around the take-up lever.
3. A confirmation message or an error message
is displayed.
4. The control system does not work correctly.
1. Lint has accumulated in the hook.
2. The machine runs out of oil.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is not inserted properly.
5. Stitch density is too dense.
6. Poor quality threads are used.
7. The bobbin thread is not threaded properly.
1. The bobbin thread is not threaded properly.
2. Lint has accumulated in the hook.
3. The bobbin is not inserted into the bobbin
case properly.
4. The bobbin or bobbin case has a scratch or
nick.
1. The needle is not inserted properly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. Stitch density is too dense.
6. The needle thread is not threaded properly.
1. The needle is not inserted properly.
2. The needle is bent or blunt.
3. The needle thread is not threaded properly.
4. The fabric is not stretched tight enough in the
hoop.
1. The needle thread tension is too tight.
2. The fabric is not stretched tight enough in the
hoop.
3. A stabilizer is not used.
4. The fabric is caught or trapped while stitching.
5. The threads are tangled on the bottom side of
the fabric.
6. Short stitches are eliminated with the “Ignore
short stitches” setting.
1. The needle thread tension is too loose.
2. The bobbin is not inserted properly.
3. A poor quality thread is used.
Reference
See page 13.
Remove jamming threads.
Follow the message to turn
it off.
Turn the power off and turn
it on again.
See page 76.
See page 78.
See page 19.
See page 30.
See page 31.
See page 31.
Modify the pattern by using
an embroidery software.
Use a high quality threads.
See page 17.
See page 17.
See page 76.
See page 17.
Replace the bobbin or
bobbin case.
See page 31.
See page 31.
See page 31.
See page 30.
Modify the pattern by using
an embroidery software.
See page 19.
See page 31.
See page 31.
See page 19.
See page 22.
See page 30.
See page 22.
See page 15.
See page 27.
Cut off and remove the
tangled threads.
See pages 59, 67.
See page 30.
See page 17.
Use a high quality thread.
Troubleshooting
85

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elna eXpressive 940 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elna eXpressive 940 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info