704000
74
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
72
Troubleshooting
Condition Cause Reference
The machine is
noisy.
1. Thread is jammed in the hook area. See page 64.
The needle thread
breaks.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is inserted incorrectly.
5. The needle thread was not set in the thread holder when embroidery
sewing started.
See page 12.
See page 57.
See page 14.
See page 14.
See page 23.
The bobbin thread
breaks.
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has been collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
See page 11.
See page 64.
Replace the bobbin.
The needle breaks. 1. The needle is inserted incorrectly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
See page 14.
See page 14.
See page 14.
Visual Touch
Screen is not clear.
1. The contrast of the screen is not adjusted properly. See page 55.
Skipped stitches 1. The needle is inserted incorrectly.
2. The needle is bent or blunt.
3. The needle thread is not threaded properly.
4. The needle is defective (rusted, burr on needle eye or tip).
5. The embroidery hoop is not set properly.
6. The fabric is not stretched tightly enough on the embroidery hoop.
7. A stabilizer is not being used.
8. The thread coming out from the needle eye is too short after auto
thread cutting.
See page 14.
See page 14.
See page 12.
Change the needle.
See page 22.
See pages 19-21.
See page 18.
See page 12.
The machine does
not run.
1. Thread is jammed in the hook area.
2. The machine is not plugged in.
See page 64.
See page 7.
Abnormal noise oc-
curs when the ma-
chine is switched
on.
1. Something is caught between the carriage and the arm. Remove the object.
The patterns are
distorted.
1. The fabric is not pulled tightly on the embroidery hoop.
2. The embroidery hoop is not xed securely.
3. The carriage is bumping into something around the machine.
4. The fabric is caught or pulled for some reason when sewing
embroidery.
5. A stabilizer is not used.
See pages 19-21.
See page 22.
Do not place any
obstacle around the
machine.
Reattach the fabric.
See page 18
Function keys do
not work.
1. Key positions are not adjusted properly.
2. The control circuit is not working correctly.
3. The bobbin winder spindle is in the winding position.
See page 55.
Contact the service
center or the store.
See page 10.
USB ash drive
does not work.
1. The USB ash drive is not inserted correctly.
2. The USB ash drive is damaged.
Insert the USB ash
drive properly.
Replace or format
the USB ash drive.
It is not abnormal for a faint humming sound to be heard from the internal motors.
The visual touch screen may become warm after several hours of continuous use.
74

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elna eXpressive 830L bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elna eXpressive 830L in de taal/talen: Engels als bijlage per email.

De handleiding is 27,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elna eXpressive 830L

Elna eXpressive 830L Gebruiksaanwijzing - Deutsch - 138 pagina's

Elna eXpressive 830L Gebruiksaanwijzing - Français - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info