703989
49
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
47
Troubleshooting
Condition Cause Reference
The needle thread
breaks
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and bobbin thread are not set under the presser
foot when start sewing.
6. The thread is either too heavy or too ne for the needle.
Page 18
Pages 11-12
Replace the needle.
Page 13
Page 20
Page 14
The bobbin thread
breaks
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
4. The thread is wound loosely on the bobbin.
Page 17
Page 45
Change the bobbin.
Page 16
The needle breaks 1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The threads were not drawn to the rear after sewing.
4. The needle is too ne for the fabric being used.
5. An inappropriate presser foot is used.
Page 13
Page 13
Page 21
Page 14
Use the correct
foot.
Skipped stitches 1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suitable for the work being sewn.
3. A blue tip needle is not being used for sewing stretch, very ne fabrics
and synthetics.
4. The needle thread is not threaded properly.
5. A poor quality needle is used.
Page 13
Page 14
Use the stretch
stitch needle.
Page 18
Change the needle.
Seam puckering 1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. A stabilizer is not used when sewing very ne fabrics.
Pages 11-12
Page 18
Page 14
Make stitch shorter.
Apply a stabilizer.
The fabric is not
feeding smoothly
1. The feed dog is packed with lint.
2. The stitches are too ne.
3. The feed dog is not raised after “drop feed” sewing.
Page 45
Make stitch longer.
Page 13
Loops on the
seams
1. The needle thread tension is too loose.
2. The needle is too thick or too ne for the fabric.
Pages 11-12
Page 14
The machine does
not work
1. The machine is not plugged in.
2. Thread has been caught in the hook race.
3. The start/stop button is used when the foot control is with the foot
control plugged in.
4. The bobbin winder spindle is not returned to the left after bobbin
winding.
Pages 5-6
Page 45
Page 8
Page 16
Buttonhole sewing
is not sewn
properly
1. The stitch density is not suitable for the fabric being sewn.
2. The interfacing has not been used for the stretch or synthetic fabric.
Page 31
Apply an
interfacing.
The machine is
noisy
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
Page 45
Page 45
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elna eXperience 450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elna eXperience 450 in de taal/talen: Engels als bijlage per email.

De handleiding is 18,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elna eXperience 450

Elna eXperience 450 Gebruiksaanwijzing - Deutsch - 52 pagina's

Elna eXperience 450 Gebruiksaanwijzing - Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info