614470
52
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
50
TROUBLESHOOTING
Condition Cause See page(s)
The machine is noisy
and does not run
smoothly.
1. Threads have been caught in the hook area.
2. The feed dog is packed with lint.
48-49
48-49
The needle thread
breaks.
1. The needle is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is not inserted correctly.
5. The thread is either too heavy or too fine for the needle.
6. The threads are not under the presser foot when sewing begins.
17
8
12
12
12
23
The bobbin thread
breaks.
1. The bobbin thread is not threaded correctly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
16
48-49
replace bobbin.
The needle breaks. 1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The needle is too fine for the fabric being sewn.
6. The stitch selection knob has been turned while the needle was in
the fabric.
12
12
12
8
12
21
Skipped stitches.
1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle and/or the thread are not suitable for the fabric being
sewn.
4. A stretch needle is not being used for sewing stretch, very fine and
synthetic fabrics.
5. The needle thread is not threaded properly.
12
12
12
12-13
17
The seam puckers. 1. The needle thread tension is too tight.
2. The machine is not threaded correctly.
3. The needle is too large for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure dial is not set correctly.
6. Threads have been caught in the hook area.
Place lightweight tearaway stabilizer under lightweight fabrics.
8
17
12
22, 23
6
48-49
The stitches form
loops underneath the
fabric.
1. The needle thread tension is too loose.
2. The needle is either too large or too small for the thread.
8
12
The fabric does not
feed smoothly.
1. The feed dog is packed with lint.
2. The pressure foot dial is not set correctly.
3. The stitches are too short.
4. The correct presser foot is not being used.
5. The feed dog is lowered.
48-49
6
22, 23
20
9
The machine does not
work.
1. The machine is not plugged in.
2. A thread is caught in the hook area.
3. The bobbin winder spindle is in the winding position.
10
48-49
14-15
The buttonhole is not
correct.
1. The stitch length is not suitable for the fabric being sewn.
2. Interfacing is not being used with fabrics.
3. Fine adjustment lever for buttonhole is not set properly.
12
33-36
34
52

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elna-3210

Zoeken resetten

  • Ik zout graag een Hollandse versie tegemoet zien van de naaimachine Elna 3210 en wanneer we die kunnen verwachten. Gesteld op 18-4-2023 om 13:51

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elna 3210 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elna 3210 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elna 3210

Elna 3210 Gebruiksaanwijzing - Deutsch, English, Français - 112 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info