741484
20
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
(((ELKRON)))
MP110 USER MANUAL
(((ELKRON)))
MP110 USER MANUAL
1. Enter the MASTER user code.
2. Press the
EXIT
F
key and then press the
C
**
key twice. The number
5 appears on the display (user 5 code).
3. Press key
1
or
2
to select another code to be enabled/
disabled: the selected code will appear on the display.
4. The zones controlled by the code under consideration are indicated
by leds 1, 2 and 3.
Led ON = zone controlled by the code under consideration
Led OFF = zone not controlled by the code under consideration
5. To change the association displayed, press the
C
**
key (the
associated sectors led blink) and use keys
1
,
2
,
3
(corresponding to zones S1, S2, S3) to combine (associate) or not
combine (associate) the desired zones to (for) the user in question.
The associated zone is indicated by the flashing of the corresponding
led; if the led is OFF, it means that the corresponding zone is not in
operation (for the code under consideration).
6. Once configuration of the the code under consideration is completed,
press the
C
**
key the blinking led will lit up fixed.To change the
association of the zones of a different code, proceed as indicated in
step 3.
7. Press
C
**
again if one wishes to terminate the operation and store
the selections made.
Press the
EXIT
F
key to exit.
2.3 Enabling/Disabling of User Codes
5, 6, 7 and 8 and codes/sectors
association
associates zone 1
associates zone 2
associates zone 3
zone 1
zone 2
zone 3
3
2
1
3
1
2
3
21
2.1 Changing Personal Code
1. Type in the access code that is to be changed. The buzzer beeps
twice to confirm that it is correct, otherwise it indicates an error with a
long beep.
2. Press the
C
**
key. The character , lit with a fixed light, appears
on the display.
3. Enter the new code .
The flashing character is displayed.
4. Enter the new code a second time.
If the new code has been correctly entered, it is accepted and this is
confirmed when the buzzer beeps twice; otherwise, an error warning
is given and the system exits the procedure.
Example of code change
- The master user wishes to change the factory code 1-11111.
- Type in 111111 on the keypad and press the
C
**
key, the character
lights up with a fixed light.
- Enter the new code, for example, 165744. The on the display
begins to flash, and re-enters the numbers 165744.
- The code is accepted when the buzzer beeps twice.
2.2 Enabling/Disabling the User 2, Engineer’s,
Telemonitoring and Key Codes
1. Enter the MASTER code.
2. Press the
F
key followed by the
C
**
key. A flashing line appears
on the display.
It is now possible to enable/disable the engineer’s code, the
telemonitoring code, the User 2 code and the key code. These 4 codes
are associated with the 4 leds present on the keypad:
ENGINEER
TELEMONITORING
USER 2
KEY CODE (EK)
3. Press the key next to the led for enabling/disabling the corresponding
code.
4. Press the
EXIT
F
key to exit the procedure.
The leds respectively indicate the
status of the codes:
Led ON = Code enabled
Led OFF = Code disabled
The key code cannot be
changed: when enabled, it
allows use of the electronic
keys and of the commutators.
When disabled, it prevents
the operation of all the
commutators and of existing
keys (only system status will
be displayed by the
commutators’ leds).
KEY
CODE
Note: the first number
of the code must be the
user’s identification
number:
1 for master user
2 for user 2
3 for engineer
4 for telemonitoring
5 for user 5
6 for user 6
7 for user 7
8 for user 8.
20
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elkron MP110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elkron MP110 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elkron MP110

Elkron MP110 Gebruiksaanwijzing - Deutsch - 32 pagina's

Elkron MP110 Gebruiksaanwijzing - Français - 120 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info