471173
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
Installation without flue
1. Use a pencil to mark the line representing the centre of
the appliance on the wall, as far as the ceiling. This will
make the installation process easier.
2. Position the drilling template on the wall: the vertical
centre line printed on the template should be aligned with
the centre line marked on the wall, and the lower edge of
the template should line up with the lower edge of the
cooker hood.
3. Rest the lower support bracket on the drilling template,
making sure it coincides with the sketched rectangle,
then mark the two outer holes and drill them.
Note: Always make the holes indicated on the template:
the 2 upper holes are used to position the hood, while the
lower holes generally 1 central or several at the sides)
are used to fix it in place and secure it properly.
Remove the drilling template, insert the rawl plugs and fix
the cooker hood support bracket in place using 2 screws
measuring 5x45 mm.
4. Hang the cooker hood on the lower bracket.
5. Adjust the distance between the cooker hood and the
wall.
6. Adjust the horizontal position of the cooker hood.
7. Fix the cooker hood to the wall securely
COMPULSORY!!).
8.
Ducting version.
Connect a tube tube and fixing clamps not supplied;
these are to be purchased separately) for the expulsion
of smoke to the connection ring located above the
suction motor assembly.
The other end of the tube should be connected to a
device for the expulsion of smoke outdoors if the cooker
hood is to be used as a ducted version.
Filter version.
Remove the air outlet connection and apply the anti-
intrusion grille.
Attention! If the hood is not supplied with carbon
filter, then it must be ordered and mounted.
9.Slot the front panel in and perform the necessary
electrical connections for the control panel.
10. Fix the front panel in place using 6 screws3 per side).
11. Slot in the side panels and fix them in place by sliding
them downwards.
12. Position the upper fixing bracket and secure it using 2
screws.
13. Perform all necessary electrical connections.
Remount the carbon filter frame and the fat/s filter/s and check
the perfect functioning of the hood.
Installation with flue
1. Use a pencil to mark the line representing the centre of
the appliance on the wall, as far as the ceiling. This will
make the installation process easier.
2. Position the drilling template on the wall: the vertical
centre line printed on the template should be aligned with
the centre line marked on the wall, and the lower edge of
the template should line up with the lower edge of the
cooker hood.
3. Rest the lower support bracket on the drilling template,
making sure it coincides with the sketched rectangle,
then mark the two outer holes and drill them.
Note: Always make the holes indicated on the template:
the 2 upper holes are used to position the hood, while the
lower holes generally 1 central or several at the sides)
are used to fix it in place and secure it properly.
Remove the drilling template, insert the rawl plugs and fix
the cooker hood support bracket in place using 2 screws
measuring 5x45 mm.
4. Place the flue support bracket “G” on the wall so that it is
against the ceiling, use the flue support bracket as a
drilling template if present, the small slot on the support
should coincide with the line made previously on the wall)
and use a pencil to mark 2 holes, then drill them Ø 8
mm) and insert 2 rawl plugs.
5. Fix the flue support bracket to the wall using 2 screws
measuring 5x45 mm.
6. Hang the cooker hood on the lower bracket.
7. Adjust the distance between the cooker hood and the
wall.
8. Adjust the horizontal position of the cooker hood.
9. Fix the cooker hood to the wall securely
COMPULSORY!!).
10. Connect a tube tube and fixing clamps not supplied;
these are to be purchased separately) for the expulsion
of smoke to the connection ring located above the
suction motor assembly.
The other end of the tube should be connected to a
device for the expulsion of smoke outdoors if the cooker
hood is to be used as a ducted version. If you wish to use
the cooker hood as a filter version, fix deflector F to flue
support bracket G and connect the other end of the tube
to the connection ring located under deflector F.
11. Perform all necessary electrical connections.
12. Position the flue.
13. Fix the flue to the flue support bracket G using 2 screws.
14. Slot the front panel in and perform the necessary
electrical connections for the control panel.
15. Fix the front panel in place using 6 screws3 per side).
16. Slot in the side panels and fix them in place by sliding
them downwards.
17. Position the upper fixing bracket and secure it using 2
screws.
Remount the carbon filter frame and the fat/s filter/s and check
the perfect functioning of the hood.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elica Space bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elica Space in de taal/talen: Engels als bijlage per email.

De handleiding is 1,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elica Space

Elica Space Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Português, Espanõl, Polski, Türkiye, Dansk, Svenska, Norsk, Suomi - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info