AC: 220V~ 240V 50Hz 700W
• Check that the voltage marked on the product
corresponds with your supply voltage.
• In common with other electrical appliances,
the product must not be taken into or used in
the bathroom or near sources of water.
• Do not immerse the product in water (refer to
section on “Cleaning”).
• Never touch the plug or use the unit with wet
hands.
• Always unplug the unit before cleaning,
moving or when not in use.
• Examine the product for wear and tear. Do
not use the unit if you see any signs of
damage. Return it to the place where you
bought it for repairs.
• Keep out of the reach of children.
• The unit will get hot whilst in use – Be careful
not to touch it.
• Always use the handle.
• Do not overfill the sandwich maker – as this
may damage the product.
• Do not use on or near a gas appliance.
• Ensure the unit is on a dry level surface
before use.
• Position the unit in a suitable place as steam
may be emitted from the ingredients when in
use. Show care on opening and closing the unit.
IMPORTANT SAFEGUARDS
The wires in the mains lead are coloured in
accordance with the following code:
GREEN/YELLOW: EARTH (E)
BLUE: NEUTRAL (N)
BROWN: LIVE (L)
Class 1 Configuration
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
• The wire which is coloured GREEN &
YELLOW (or coloured GREEN) must be
connected to the terminal in the plug which is
marked with the letter “E” or by the earth
symbol:
• The wire which is coloured BLUE (or coloured
BLACK) must be connected to the NEUTRAL
terminal which is marked with the letter “N”.
• The wire which is coloured BROWN (or
coloured RED) must be connected to the LIVE
terminal which is marked with the letter “L”.
Always ensure that the Mains Cord is fixed into
the plug through the Cord Guard or Cable Clamp,
(plug wiring diagram above), and that the Cord
Guard screws are tightened to clamp the cord
(outer sheath and inner coloured wires) into
position in the plug. Make sure that the plug top is
also fitted securely.
TECHNICAL SPECIFICATION
SPECIAL SAFETY ADVICE
