633187
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
Instructions For Use. Page 5E20
To select any input, simply press
the Source Up or Source Down button
on the remote control, the preamp will
then cycle through the inputs until the
desired one is selected. The volume
control is motorised, so that when you
press Volume Up or Volume Down on
the remote, the control will rotate in the
required direction. The red LED in the
volume control knob indicates the cur-
rent setting of the control. To temporar-
ily turn off the sound, in order to answer
the telephone for instance, press the
MUTE button on the remote control.
The mute LED will light indicating the
muted state. It is advisable to acquire
the habit of turning down the volume to
zero before switch off.
HEADPHONES
The E20 has a standard 1/4" jack
socket for connecting headphones. If
your headphones are supplied with the
type of mini-jack which is commonly
used for portable cassette players, you
will need to use a mini-jack to 1/4" jack
adaptor. The E20 has a separate low
powered Class A amplifier for
headphone use. When you plug in the
headphones, the main preamp output
will be muted. Most headphones avail-
able on the market are suitable for use.
CONNECTIONS
All connections should be made
with the power OFF.
The E20 has inputs for Phono (MM and
MC), CD, Tuner, Video, LD, Auxiliary
and two Tape decks (1 and 2).
TAPE CONNECTIONS
Note that the E20 has connections
for two tape decks.
You could therefore have two tape
decks connected at the same time. To
listen to Tape 1, select Tape 1 with the
source selector, to listen to Tape 2, select
Tape 2 on the source selector.
For recording on Tape 1, whatever
source is selected on the source (listen)
selector will automatically be sent to the
Tape 1 record outputs.
Tape 2 has its own record selector
which is controlled by the push buttons
on the front panel. This allows you to set
which source you wish to record on Tape
2 independently from what is selected by
the source (listen) selector. Thus it is
possible to for instance listen to the CD
input while recording the Tuner input on
Tape 2.
PREAMP OUTPUTS
In order to be used with loudspeak-
ers, the E20 must be connected to a
power amplifier, such as the Musical
Fidelity Elektra E30. Connections are
made with standard Phono/RCA type
cables.
OPERATION
All functions of the E20, with the
exception of the TAPE 2 RECORD
SELECT and power on and off, can be
controlled via the supplied remote con-
trol.
CONNECTIONS
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elektra E20 - REMOTE CONTROL STEREO PREAMPLIFIER bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elektra E20 - REMOTE CONTROL STEREO PREAMPLIFIER in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info