There are one main power switch on the appliance and four buttons on the control panel and
remote of the electric fireplace. You can select them at your choice.
1． Main power switch: set main POWER switch to position “1” and turn on the main power switch
of the electric fireplace. As the main power switch is on, the indicator may not illuminate (please
press “ON/OFF” on the control panel or “ ” on remote button to light up the power indicator).
Meanwhile, it will give out a brisk warning tone to hint the operator that the main power switch is
on. All the functional operations are not available automatically after turning off the main power
switch. Set main power switch to position “0” to turn off the main power.
2. Power supply: press “ON/OFF” on the control panel or “ ” on remote to turn on the electric
fireplace. As the indicator illuminates, the artificial flame works at the same height as that of the
latest shut down. The heater does not work automatically when starting up. Please refer to Item
(3) and note that all the operations work only the power is on. When it works, press “ON/OFF” on
the control panel or “ ” on remote again to turn off the electric fireplace.
3. Adjustment of lightness of artificial flame: When starting up, the artificial flame will work
automatically. As the indicator illuminates, the lightness of the artificial flame is the same as that
of the latest shut down. Press DIMMER button on the control panel or remote, the artificial flame
will be ready for lightness adjustment. When it blinks, the lightness of artificial flame and charcoal
will turn lighter. When the artificial flame reaches your desired lightness, press DIMMER button
on the control panel or remote again, the artificial flame and charcoal will maintain the lightness
you chose.
4. The two indicators of the heater show its current working states as the lower power and higher
power respectively. If neither the indicators illuminate, it means the heater does not work. When
the heater works at the lower power (the light does not illuminates), press LOW button on the
control panel or remote to switch to higher power. Press LOW button on the control panel or
remote again to turn off the heater. Similarly, Press HIGH button on the control panel or remote to
reach higher power. When the light illuminates, press HIGH button on the control panel or remote
to turn off the heater. Please note that when the heater begins to work, the hot blast outlet may
give off cool air for 10 seconds. As the heater stops working, the hot blast outlet may also give off
cool air for 10 seconds. It is a normal phenomenon to protect the inner circuit.
5. If you have to leave for a long time, please turn off the main power switch after you.
