830952
21
Verklein
Vergroot
Pagina terug
1/240
Pagina verder
GB
- 21 -
5. Before starting the equipment
Warning!
Always pull out the battery before making ad-
justments to the equipment.
All covers and safety devices must be properly
tted before the equipment is switched on.
5.1 Fitting the extraction socket
(Fig. 1.2/Item 11)
Caution! For health and safety reasons it is
imperative that you use a dust extractor.
Connect your cordless tool to a domestic
vacuum cleaner or a dust extractor using
the extraction socket (11). This will ensure
optimum dust extraction from the workpiece.
The benefits are that you will protect both the
equipment and your own health. Your work
area will also be cleaner and safer.
Dust created when working may be dange-
rous. Refer to the section entitled “Safety inst-
ructions”.
The vacuum cleaner you use for the vacuum
extraction must be suitable for the material
you are machining. Use a special vacuum
cleaner if you are handling harmful materials.
Cordless palm router (Fig. 1.2/Item 11)
Secure the extractor adapter (11) to the
palm router insert (20) using the countersunk
screw (12).
The extractor adapter can be connected to
extractor units (vacuum cleaners) with a suc-
tion hose.
The internal diameter of the extractor adapter
is 36 mm. Now fit a suction hose of matching
size to the extractor adapter.
5.2 Fitting the parallel stop (Fig. 3/ Item 19)
Undo the fastening screw for the routing gui-
de (10).
Insert the parallel stop (19) in the holder for
the routing guide (10) as shown in Fig. 3 and
retighten the fastening screw for the routing
guide (10).
Set the parallel stop (19) to the required di-
mension and secure it in place with the wing
screw (c).
5.3 Fitting the compass point (Fig. 4/Item 18)
You can cut circular areas using the compass
point (18).
To do so, undo the wing nut (c) and remove
the front section of the parallel stop (19).
Screw-fit the compass point (18) on the par-
allel stop (19) as shown in Fig. 5. Now fit the
parallel stop (19) together with the compass
point (18) on the router.
The procedure for fitting is the same as de-
scribed in section 5.2 except that the parallel
stop (19) must be turned through 180° so that
the compass point (18) points downwards
(Fig. 4).
Set the required radius between the compass
point (18) and the cutter.
Position the compass point (18) in the center
of the circle you wish to cut.
5.4 Fitting and using the copy sleeve
(Fig. 5-8/Item 14)
Remove the four recessed head screws (d)
from the bottom of the palm router insert and
take off the cover (e) (Fig. 5).
Insert the copy sleeve (14) as shown in Fig. 6.
Refit the cover (e) using the four recessed
head screws (d).
The copy sleeve (14) will be guided along the
template (g) by the guide ring (f).
To obtain an exact copy the workpiece (h)
must be larger by the difference between the
“external edge of the guide ring” and the “ex-
ternal edge of the cutter” (i).
5.5 Fitting/removing the cordless routing unit
(Fig. 9)
Warning! Remove the battery.
To insert the cordless routing unit (1) in the
palm router insert (20), first undo the faste-
ning screw for the depth adjuster (8) and then
insert the cordless routing unit (1).
Then use the height adjuster (9) and the sca-
le (22) to set the required cutting depth.
Finally retighten the fastening screw for the
depth adjuster (8).
5.6 Fitting/removing the cutting tool
(Fig. 10- 14)
Warning! Remove the battery.
Caution! When you have nished working
with the palm router, the cutting tool will stay
very hot for a relatively long time!
Caution! Cutters are very sharp. Wear protec-
tive gloves at all times when handling cutting
tools.
To make it easier to change the cutter, re-
move the cordless routing unit (1) from the
Anl_TP-ET_18_Li_BL_Solo_SPK13.indb 21Anl_TP-ET_18_Li_BL_Solo_SPK13.indb 21 12.07.2022 09:06:4912.07.2022 09:06:49
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Einhell TP-ET 18 Li BL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Einhell TP-ET 18 Li BL in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info