7
GB
Packaging
The unit is supplied in packaging to prevent it from
being damaged in transit. The raw materials in this
packaging can be reused or recycled.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage.
Ȝ Read the operating instructions carefully and
comply with them at all times. It is important to
consult these instructions in order to acquaint
yourself with the unit, its proper use and the
important safety regulations.
Ȝ Keep this manual in a safe place, so that the
information is available at all times.
Ȝ If you give the equipment to any other person,
make sure that you pass on these operating
instructions as well.
We can accept no liability for damage or
accidents which arise due to non-compliance
with these instructions.
1. Layout(Figure 1)
1 Grass cutter blade
2 Wheels
3 Safety lock-off
4 ON button
5 Long handle
6 Handle grip
2. Explanation of the warning signs on
the machine (Figure 2)
1. Important! Read the operating instructions
and follow the warnings and safety
instructions
2. Keep all other persons away from the danger
zone.
3. Caution! The cutter blades continue to run
after the motor is switched off. Wait for the
blades to come to a standstill.
Risk of injury!
4. Important! Always wear goggles when
working with the grass and shrub cutter.
5. Dispose of batteries correctly!
6. Protect the tool from the damp and never
expose it to rain.
3. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
4. Proper use
The equipment is designed for cutting the edges of
lawns and small areas of grass in private and hobby
gardens.
Tools for private and hobby gardens are not suitable
for use in public facilities, parks and sport centers,
along roadways, on farms or in the forestry sector.
For the tool to be used properly it is imperative to
follow the instructions set out in the manufacturerʼs
directions for use.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.
5. Technical data
Cutting width : 85 mm
Running time max.: 90 min
Speed n
0
: 1150 rpm
Battery pack: Ni-Cd / 7.2 V d. c. / 1.5 Ah
Charging time: 4-6 h
Protection class: III
L
pA
sound pressure level: 67.7 dB
L
WA
sound power level: 78.7 dB
Vibration a
hV
: ≤ 2.5m/s
2
Charger:
Mains voltage: 230 V ~ 50 Hz
Rated voltage output: 12 V d. c.
Rated current 300 mA
Sound and vibration were measured in accordance
with IEC 60335-2-94.
6. Starting up
6.1 Charging the battery pack (Fig. 6)
Ȝ Check that your mains voltage is the same as
that marked on the rating plate of the battery
charger.
