831594
16
Verklein
Vergroot
Pagina terug
1/169
Pagina verder
GB
- 16 -
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Cut injuries are possible if no safety clothing
is used.
2. Lung damage if no suitable protective dust
mask is used.
3. Damage to hearing if no suitable ear protec-
tion is used.
4. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Charging the rechargeable battery
Connect the unit to the charger (Figure 3).
Check that your mains voltage is the same as
that marked on the rating plate.
The time it takes to fully recharge an empty
battery is approximately 3 to 5 hours. The
temperature of the battery pack might rise
slightly during the charging operation. This is
normal.
Charging procedure
Plug the charger in a socket-outlet; a red LED
(Fig. 3/Item A) lights up to indicate that charging is
in progress. The battery pack is being charged.
Charging completed
The red LED (Fig. 3/Item A) goes out. A green
LED lights up in its place (battery charged).
Battery does not charge up
If the battery fails to charge, please check
- whether there is voltage at the socket outlet.
- whether there is good contact at the charging
contacts.
- whether the red LED and the green LED (Fig.
3/ Item A) light up at the same time. This can
happen, for example, if the battery tempera-
ture becomes too low or too high. Place the
unit in storage at room temperature for one
day.
If you still fail to charge the battery pack, please
return the complete tool together with the battery
charger to our Customer Service Center.
To ensure that items are properly packaged
and delivered when you send them to us,
please contact our customer service or the
point of sale at which the equipment was
purchased.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and res.
To ensure that the battery pack provides long ser-
vice, you should take care to recharge it promptly.
You must recharge the battery pack when you
notice that the performance of the device drops.
Never allow the battery pack to become fully di-
scharged. This will cause it to develop a defect.
Warning! Any foreign bodies must be com-
pletely cleared away from the area to be
worked on.
Warning!
The switching devices installed on the tool
by the manufacturer are not allowed to be
removed or bypassed, e.g. by tting a swit-
ching button to the handle, as this may result
in risk of injury and the tool will no longer
switch o automatically.
6. Operation
6.1 Using the equipment as grass shears
Allow the grass shears to glide over the ground.
The best cutting performance is achieved on dry
lawns.
The blade guard hood must be pushed over the
blade when the unit is not being used.
The grass shears is supplied ready assembled.
(Fig. 4) Remove the blade guard hood (Item 6).
6.1.1 Switching on/o .
1. (Fig. 4) To switch on, press the safety lock-o
(Item 3) and press the On/O switch (Item 4)
at the same time.
2. To switch o , let go of the On/O switch.
Anl_GC_CG_3_6-70_Li_WT_SPK13.indb 16Anl_GC_CG_3_6-70_Li_WT_SPK13.indb 16 21.06.2022 09:20:0021.06.2022 09:20:00
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Einhell GC-CG 3.6-70 Li WT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Einhell GC-CG 3.6-70 Li WT in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info