388952
5
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
Ferm 05
GB
40 Ferm
Whenever any of the problems mentioned
above appear, immediately cease using the
machine and have it repaired by an expert.
Electrical safety
Always check that the mains voltage is
the same as on the type plate of the
machine.
The machine is double insulated; there-
fore, no earth connection is required.
Replacement of power cords or plugs
Immediately dispose of old cords and plugs once
they have been replaced. It is dangerous to plug
a loose power cord into a mains power socket.
Use of extension leads
Only ever use approved extension leads that are
suitable for the power rating of the machine.
The
minimum core thickness is 1.5 mm
2
. Whenever
using a reel extension lead, always fully unroll
the lead.
3. OPERATING
Hammer drills require very little operator
pressure. Excessive pressure on the tool
can lead to unnecessary overheating of
the motor, and burning of the driven tool.
Auxiliary handgrip
The auxiliary handgrip can be rotated 360º
around the drill head, enabling safe and comforta-
ble operation, for both left and right-handed users.
Loosen the handgrip by turning it anticlockwise.
Rotate the handgrip to the desire position.
Retighten the handgrip in the new position.
Exchanging and removing drill bits
Fig. A + B
Before exchanging bits, first remove the
power plug from the wall socket.
Inspect bits regularly during use. Blunt
bits should be re-sharpened or repla-
ced.
Lightly lubricate the shaft of the drill bit before
inserting into the machine.
Place the shaft of the drill bit into the opening of
the drill chuck and twist until latched.
To release and remove the drill bit pull back the
collar of drill chuck .
Setting depth gauge
Loosen the handgrip by turning it anticlockwise.
Insert the depth gauge ruler through the hole in
the auxiliary handgrip.
Slide the ruler to the desired depth.
Retighten the screw firmly.
Function selection switch
Fig. D
The correct position of the selection switch for
each machine function is given in the diagram on
page 3.
1 = Demolition hammer/chisel
2 = Rotary hammer drill
3 = Drilling
Switching On/Off
To start the drill, squeeze the trigger.
To stop the drill, release the trigger
.
Installing dust catcher
Fig.C
The dust catcher prevents large amounts of dril-
ling dust entering the machine when drilling into
ceilings.
Remove the drill bit.
Slide the dust catcher over the shaft of the drill
bit.
Place the drill bit with catcher in the drill chuck.
Always replace a damaged dust catcher imme-
diately.
4. MAINTENANCE
Take care that the machine is not con-
nected to power whenever maintenance
work on the mechanical parts is taking
place.
The machines are designed to function problem-
free for a long period with a minimum of mainte-
nance.
Through regular cleaning and correct tre-
atment, you help assure a long working life for
your machine.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Economy-hdm-1015-ebf-850k

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Economy hdm 1015 ebf 850k bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Economy hdm 1015 ebf 850k in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Deens, Noors als bijlage per email.

De handleiding is 2,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info