654278
27
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
Bedienungsanleitung/ Instruction manual
26
Unscrew the bracket of the
upper burr. Please note that
it may take some force to do
so.
Clean the burrs and the
threads with a brush. You
may use a vacuum cleaner as
well.
Make sure that everything is
clean when re-assembling
the parts. There should be
no coffee grounds remaining
on the thread. Otherwise you
will not be able to put the
parts back together again
correctly.
Re-assemble the grinder and
re-adjust the grinding level.
9 TIPPS AND TROUBLESHOOTING
Should a bean become stuck in the grinding mechanism, you may easily fix this yourself.
1 Adjust the grind to a coarser degree. Turn the grind adjuster counter-clockwise by two full turns.
2 Press the portafilter against the grinding button and grind coffee. The stuck beans should now come loose.
3 Re-adjust the grind.
In case the coffee shute of your grinder is plugged due to too fine a grind (depending on temperature, humidity, fat
and oil content of the respective coffee), please take the following steps to solve the problem:
1 Switch the grinder off, switch in „off“ position. Unplug the power chord.
2 Close the side bar of the bean hopper, so that no further beans can drop into the grinding area of the grinder.
3 Insert a suitable tool into the grounds shute of the grinder (e.g. an espresso spoon, the shaft of the grinder
brush) and entirely clean out the grounds which have plugged the shute.
4 The grounds may have collected in the corners of the shute as well and should be cleaned out.
5 Remember or note the current grind setting on the number scale. Increase the grind setting by one number, so
the beans remaining in the grinding section can pass through without resistance.
6 Plug the power chord of the grinder back in and turn on the grinder.
7 Start the grinding process as usual by activating the grind switch. The remaining coffee grounds should now
come out of the shute easily. Manually clean the entire shute with a suitable tool again (unplug the power cord).
Activate the grind switch until no further grounds come out. If need be, manually clean the shute again.
8 Open the slide bar of the bean hopper.
9 Re-calibrate the grind setting with the grinding time as required during the next few grinds. A coarser grind can
be compensated by using more ground coffee or by tamping harder.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ecm S-Automatik 64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ecm S-Automatik 64 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info