782673
2
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.com/locater
2 3
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483
English
Important:
Eccotemp EZ-Flush System Descaler Kit has been designed to work in conjunction with isolation valves that provide 3/4” hot and
cold service connections. If these valves have not been installed on your heater then the heater must be disconnected from the
plumbing and drained, and the Eccotemp EZ-Flush System Descaler Kit must be connected directly to the cold and hot water
connections. Eccotemp EZ-Flush System Descaler Kit is NSF approved and safe to dispose of in drains.*
Whats Included:
EZ-Flush System Descaler Kit
built in pump
AC Adapter
1 QT. liquid descaler solution
(2) 5’ rubber hoses
Recommended Uses:

Vacuum Pumps, Condensers, Evaporators, Tanks, Potable Waterlines, and Water
Operated Equipment.
Descaling Instructions:
PLEASE NOTE: The Eccotemp EZ-Flush System
Descaler Kit MUST
use.
1. Disconnect power to water heater.
2. Close hot and cold isolation and service valves and
remove the service caps.
3. Connect one hose to the water outlet labeled
“OUTLET” and the other end of the same hose to
cold service valve.
4. Connect one hose to the water inlet labeled “INLET”
and the other end of the same hose to hot service
valve.
5. Pour in water along with contents of 1 quart Eccotemp
Descaler into the EZ-Flush System Descaler Kit until
you’ve reached the top of the runner hose inside of
the reservoir.
PLEASE NOTE: add additional water if needed to

6. Open both hot and cold service valves.
7. Plug Eccotemp EZ-Flush System Descaler Kit into
grounded receptacle.
8. Turn the Eccotemp EZ-Flush System Descaler Kit to
the on position labeled “ON”. Never allow pump to
run without adequate liquid in bucket or damage to
the pump will occur.
9. Allow pump to circulate Eccotemp EZ-Flush System
Descaler Kit solution through heater for 30-45 minutes.
10. Turn Eccotemp EZ-Flush System Descaler Kit to the off
position labeled “OFF”.
11. Close cold service valve. Remove hose from cold
service valve, and replace service cap.
12. Disconnect the hose from the water inlet labeled
“INLET”. Discard Eccotemp EZ-Flush System Descaler
Kit Solution.*
13. Disconnect the hose from the outlet labeled “OUTLET”.

clear by opening the cold isolation valve and allowing

or bucket, empty as needed during the process.
15. Close hot service valve. Remove hose from hot service
valve and replace service cap; then open hot isolation
valve.
16. Connect power to water heater and return application
to service.
PLEASE NOTE: The Eccotemp EZ-Flush System
Descaler Kit MUST
Warning: THE ECCOTEMP EZ FLUSH SYSTEM DESCALER KIT MUST BE ON A FLAT, EVEN SURFACE BEFORE USE.
Storage:
Please note: Flushing your EZ-Flush before storage is important to prevent corrosion of internal components of the EZ-Flush.
1. While the EZ-Flush is still plugged in and disconnected from your water heater, dump 1 gallon or of fresh clean water into

2. 

as well.
3. Once your EZ Flush kit has been rinsed with clean water you are ready for storage. When your cleaning kit and
accessories are dry, put all accessories back in the top of the kit. Close and lock the lid and sore it for another use.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eccotemp EZ-Flush System Descaler Kit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eccotemp EZ-Flush System Descaler Kit in de taal/talen: Engels als bijlage per email.

De handleiding is 5.4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info