701125
35
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
EN
2.1 Other possible displays
Lb Battery almost empty.
E2 Electric fan or blower – fault.
E3 Compressor – fault.
E5 Overheating of compressor electronic
module.
E6 Frost protection sensor – incorrect contact
or defect.
E9 Compressor protection – cab overturned.
E0 Temperature sensor, return air – faulty con-
tact or defective.
EC Communication cable – fault.
Note
If E2 / E3 / E5 / E6 / E0 / E0 or EC is displayed, go
to an authorised Eberspächer workshop.
2.2 Switching on
Press the ON / OFF button of the control unit.
The air-conditioning system always starts in
Function F4 (automatic operation).
Note
When starting up for the first time the air-condi-
tioning system starts with the parameters set in
the factory.
2.2.1 Select function F0 to F6
To select press the ON / OFF
button until the
required function (F0 – F6) appears in the
display.
F0 Manual operation
F1 Display of the temperature in the driver's
cab
F2 Programming the operating period
F4 Automatic operation
F6 Display °C or °F
Note
Functions F3 and F5 are not assigned.
2.2.2 Function F0 – manual operation
F0 appears in the display.
Setting the temperature and blower speed at
the control unit
Set a temperature value between 15 ºC and
27 ºC or 59 ºF and 71 ºF by briefly pressing the
or button. The set temperature value
appears in the display.
Set a blower speed V1, V2, V3, V4 or V5 by keep-
ing the
or button pressed. During the set-
ting the blower level is shown in the display.
2.2.3 Function F1 – query the temperature
in the driver's cab
F1 appears in the display, the current tempera-
ture in the driver's cab is then displayed.
2.2.4 Function F2 – program the operating
period
F2 appears in the display. The operating period
can be set for a period of 1 to 9 hours by press-
ing the
or button briefly. Press the
ON / OFF
button to confirm the set operating
period.
2.2.5 Function F4 – automatic operation
F4 appears in the display. With this function the
air-conditioning system controls the tempera-
ture automatically by adjusting the blower
speed.
Setting the temperature at the control unit
Set a temperature value between 15 ºC and
Operating Instructions | Cooltronic G2 / G2.5 Hatch
81.0000.95.2783 | EN | 10.2019 35
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eberspacher Cooltronic 1400 G2 Hatch bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eberspacher Cooltronic 1400 G2 Hatch in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Turks, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 1,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info