479781
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
5.3 Formatting the memory or micro SD card
1. Press the menu button ( ) in PHOTO or VIDEO mode.
2. Select the setup mode by press the right button.
3. Select the format icon by press the W( ) button and press the SHUTTER button to
confirm.
4. Select Internal memory / SD card then press the SHUTTER button.
5.4 Setting the resolution
The camera can be set to different resolutions.
1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by W ( ) key
and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),
5M (2560 x 1920), 8M (3264x2448), 12M (4032 x 3024)
2. Six different resolutions will be displayed. Select the desired resolution by using the up or
down buttons and press the SHUTTER button to confirm the selection.
5.5 Taking photographs
1. Turn on the camera.
2. Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol ( ) if you wish to take a close-up photograph
(11cm –18cm).
If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the
macro switch to normal mode ( ).
3. If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing the
flash button. (If the battery power is too low, the flash won’t be activated).
4. Use the LCD screen to aim the object you wish to take photograph.
Use the face detection to aim the people you wish to take photograph.
5. Press SHUTTER button and wait until the LCD display turn on again.
6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is
detected
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 8 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the
maximum zoom ratio.
5.7 Self-timer setting
You can use the self-timer function when you wish to take a photograph for yourself or when you
wish to take a photograph for an object which the camera must be as still as possible.
1. Set the camera to photo mode.
2. Press the MENU button ( ). The menu will appear.
3. Press the W( ) button to select Capture Mode and confirm by pressing the SHUTTER
button.
4. Press the W( ) button to set the delay time: 10S Timer.
5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photo.
7. Press the SHUTTER button to take a photograph.
8. The photo will be taken after the timer reaches the delay time that you pre-setted and the
camera will beep during the delay time.
5.8 Recording video clips
1. Press the MODE button to select the video clip mode( ).
2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the
SHUTTER button to confirm. Two resolution will be displayed.
VGA (640 x 480) QVGA( 320 x 240).
3. Press the SHUTTER button to start recording video, press the SHUTTER button again to
stop recording. The video clip will now be saved as an AVI file in the camera memory.
5.9 Playback photographs
1. Press the( ) button to get into playback mode.
2. Press the left or right buttons to see photographs.
3. In full screen display , press the T( ) button to zoom in the photo.
4. To view images in thumbnail, press the W( ) button.
5. To shift the image in zoom-in mode, press the SHUTTER button then use the
up/down/left/right buttons.
6. Press the MENU ( ) button in Playback mode, press and hold MENU button again until the
menu options displayed. Select SLIDE SHOW and slide show time then press the ENTER
button to confirm. The pictures saved in your camera or your micro SD card will be
displayed in sequence automatically. To stop slide show, press ENTER button again.
5.10 Playback video clips
1. When video clips are displayed, press the SHUTTER button to start playing the video and
press the SHUTTER button again to pause the playback.
2. press right button to fast forward or press left button to rewind.
3. Press the down button to stop.
4. Press the mode button to exit.
5.11 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips in the memory.
Follow the instructions given below to delete photograph.
1. Press the ( ) button to enter the playback mode.
2. Press left or right button to select photograph/video clip to be delete.
3. Press the MENU/delete button and select Delete This Image(Video) / All .
4. Press the SHUTTER button ,then select OK to confirm.
5. Press the mode button to exit.
NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be
deleted.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video
files for storage.
7. Specifications
Sensor 5.0 Mega pixel CMOS sensor
Image resolution
12.0 Mega pixels: (4032x3024)
8.0 Mega pixels: (3264x2448)
5.0 Mega pixels: (2560x1920)
3.0 Mega pixels: (2048x1536)
1.3 Mega pixels: (1280x960)
VGA: (640x480)
Lens F/2.8 f = 8.5mm
Focus range 0.5m. ~ Infinity
Macro mode 11cm – 18cm
Digital zoom 8x
Flash strobe Built-in ( Auto / force / off )
LCD display 2.7" TFT color display
White balance Auto / Daylight / Cloudy / Fluorescent / Tungsten
Video mode 20fps@VGA&30fps@QVGA with micro SD card
External memory card SD card supports up to 8GB
File format Picture: JPEG, Video: AVI
Self timer
10 seconds
PC interface USB 2.0
Power source 2xAAA alkaline batteries
8. System requirement
Operating system
Windows XP / Vista or above
Mac 9.x or X.x
CPU Pentium III or above
RAM At least 64MB
Interface USB port
CD 4x speed CD ROM or above
9. Troubleshooting
Problem Cause Solution
Cannot turn on the camera Low battery power.
Battery placed at wrong
polarities.
Replace or install the battery
correctly.
Photos can not be saved
when taking pictures.
The memory card or built-
in memory hasn’t been
formatted properly.
Format the memory in setup
mode of the camera. Please
refer to section 5.3.
Cannot find removable disk
after connecting the
camera to the computer.
Connection failure. Make sure all cable
connections are secured and
restart the computer if
necessary.
Flash does not work. Battery power is too low. Replace with new 2xAAA
alkaline batteries.
The batteries used up very
fast.
Incorrect or old, used up,
battery
Replace with new 2xAAA
alkaline batteries.
The photos are blurry 1. The camera is not held
steadily
2. The lens of camera is
dirty.
1. Hold the camera steadily
until it beeps when taking
video photo.
2. Clean the lens with soft dry
cloth.
For EU only
AM-TDC5L4-AGB-CLV
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Easypix V527 Diamond bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Easypix V527 Diamond in de taal/talen: Engels als bijlage per email.

De handleiding is 2,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Easypix V527 Diamond

Easypix V527 Diamond Gebruiksaanwijzing - Nederlands - 3 pagina's

Easypix V527 Diamond Gebruiksaanwijzing - Deutsch - 3 pagina's

Easypix V527 Diamond Gebruiksaanwijzing - Français - 2 pagina's

Easypix V527 Diamond Gebruiksaanwijzing - Italiano - 3 pagina's

Easypix V527 Diamond Gebruiksaanwijzing - Português - 2 pagina's

Easypix V527 Diamond Gebruiksaanwijzing - Espanõl - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info