731580
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
1
USER MANUAL
Product introduction
A Pulse Oximeter is a common device used to check oxygen
saturation (SpO²) and pulse rate.
It is a compact, reliable and durable physiological
monitoring device featuring an OLED display and powered
by batteries (not included).
Intended use
The Pulse Oximeter is reusable device and is intended for
spot checking the pulse oxygen saturation and pulse rate of
adults.
It should not be used for continuous monitoring this
should only be done under the guidance of your doctor.
Restrictions
Use of the device is for adults only.
Please do not use the device for children, infants and
neonatal. The product is not suitable for children under
3 years because of choking hazard.
Safety instructions
The person using the Pulse Oximeter must have read the
instructions for use carefully.
This product should only be used to give an indicative or
reference reading. It should not be used to determine a
diagnosis without consultation with your doctor. Longer
term or ongoing use should only be under the guidance of
your doctor.
If you experience any discomfort in use, please stop
immediately and seek medical help.
When using the Pulse Oximeter the user should pay
attention to, and guarantee safety of the patient being
measured.
The Pulse Oximeter does not feature an alarm function. It
should not be used for continuous monitoring for an
extended period.
Damaged skin tissue can not be measured.
Do not use the device if it has been damaged in any way.
Do not use the device in any way other than that described
in this manual.
Do not to use the Pulse Oximeter during MRI (magnetic
resonance imaging) scanning or CT (Computed
To m o g ra p hy ) environment as the induced current could
potentially cause burns.
The device should not be modified, repaired or serviced in
any way by the end user.
Do not use the Pulse Oximeter in the presence of
flammable anesthetics, explosive substances, vapors or
liquids.
Ensure the device is always clean and free from dirt before
use.
Before cleaning the device, ensure it is turned off.
Do not use high pressure or high temperature to disinfect or
clean the device. Never use cleaning agents/disinfectants
other than those recommended.
The device is a factory sealed unit. Keep its surface dry and
clean, and prevent contact with liquids.
The Pulse Oximeter is precision device. Avoid pressure,
knocks, strong vibration or other mechanical damage.
Please store safely when not in use.
For disposal of Pulse Oximeter and accessories, follow local
regulations regarding disposal of such a device and
accessories. Do not dispose of randomly.
Use AAA alkaline batteries. Do not use carbon or poor
quality batteries. Remove the batteries if the product will
not be used for an extended period of time.
Avoid exposure to static electricity before using the Pulse
Oximeter.
When in use, keep the device away from radio receivers.
To av oi d e n ha nc ed el ec t rom a g n et ic ra di at i o n or r e duc e
anti-electromagnetic interference performance, only use
the device as configured.
Portable and mobile radio frequency communication
equipment can affect the normal use of the pulse oximeter.
Storage environment
The Pulse Oximeter should not be close to or stored with
other equipment.
Always store the device and small parts such as batteries
out of the reach of children.
Always ensure suitable supervision of patients or others
where the device is used on a lanyard.
Box contents
Pulse Oximeter, Lanyard, User manual EN/DE
Technical data
OLED display
SpO²: Measurement range: 70-100%
Accuracy: ±2% (70%-99%)
Pulse rate:
Measurement range: 30-240bpm
Accuracy: ±2bpm
Working voltage: DC3V
Battery type: 2x 1.5V AAA alkaline batteries
are required (not included)
Power consumption: < 30mA
Automatic shutdown after 10 seconds
Use environment: 5°-40°C
Storage environment: -10°-40°C
Ambient humidity: 15%-80%
Atmospheric pressure: 70kPa-106kPa
Size: 58 x 32 x 34 mm
Weight: 50g (with two AAA batteries)
Description of the product
POWER / FUNCTION BUTTON
Function description
The Pulse Oximeter is used to measure arterial oxygen
saturation (SpO²) and the pulse rate. Oxygen saturation
indicates the percentage of haemoglobin in the arterial
blood that is loaded with oxygen.
The Pulse Oximeter uses two light beams of different
wavelengths for measurement. These light beams strike the
inserted finger inside the housing and are put in relation to
each other during measurement. The arterial oxygen
saturation is then calculated and displayed on the Pulse
Oximeter.
1. Infrared Light Emitting 2. Infrared Light receiver
You can also find these instructions online
under the following link.
FR : Un manuel dans votre langue est disponible
sur Internet:
IT: Il manuale nella sua lingua può essere
trovato su Internet:
ES: Puede encontrar un manual en su idioma en
Internet:
PT: Um manual em seu idioma pode ser
encontrado na Internet:
PL: Instrukcję w swoim języku możesz znaleźć na
stronie:
SWE: En handbok på ditt språk finns på Internet:
NL: Een handleiding in uw taal vindt u op
internet:
www.easypix.info/download-
manuals/download/pulseoximeter-po2/
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Easypix PulseOximeter PO2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Easypix PulseOximeter PO2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Easypix PulseOximeter PO2

Easypix PulseOximeter PO2 Gebruiksaanwijzing - Nederlands - 2 pagina's

Easypix PulseOximeter PO2 Gebruiksaanwijzing - Deutsch - 2 pagina's

Easypix PulseOximeter PO2 Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info