703770
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
EN Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
+49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
Setting Drill Holes
6. If the position is correct,
use a suitable drill and an 8 mm drill bit
to drill the marked holes with a minimum depth of 85 mm.
Taking the Article Apart for Mounting
7. Unscrew the stainless steel bolt using the hexagon key wrench,
remove the snap cover from the screw-on block and take the
spreading spring with the securing tube out of the screw-on
block.
Screwing Tight
8. Insert the dowels into the drill holes.
9. Depending on the gap size, screw tight the screw-on block or
the packing plate and the screw-on block using the counter-
sunk screws and the Torx bit TX25, if necessary use a bit exten-
sion if the Torx bit TX25 is not long enough.
The packing plate is used as a spacer from a gap size of
> 4 cm. In the case of gap sizes up to max. 4 cm, the pack-
ing plate is not used.
Attaching the Snap Cover
10. Place the spreading spring (with securing tube) into the guide
rail in such a way that the stainless steel bolt with the washer
can be plugged through the round opening of the spreading
spring.
11. Place on the snap cover.
12. Plug the stainless steel bolt with the washer into the drill hole
without a thread in the snap cover and gently tighten it with the
aid of the hexagon key wrench.
The securing tube may only be removed from the spread-
ing spring after the mounting of the snap cover has been
completed!
Use
The article is now activated and the window can no longer be
opened without activating the article at the same time.
To open the window, press the snap cov-
er towards the wall.
When the window is closed, the article
automatically snaps into the securing po-
sition.
To protect the window frame:
stick one or two small felt pads on
the inside of the window sash at the
level of the article. These act as a
sliding surface between the article and
window frame.
stick two rubber buffers onto the front
surface (A) of the snap cover (1)
(contact surface with window sash).
For further information: www.fenster-schnapper.de
Cleaning and Storage
CAUTION!
Do not use any corrosive or abrasive cleaning agents! They
could damage the surface.
If the article is dirty, clean it with a damp cloth and mild deter-
gent if necessary.
Technical Data
Article number: 04117
Size:
Length approx. 10 cm
Width approx. 7.5 cm
Height opened: approx. 6 cm
Height opened with packing plate: approx. 7.5 cm
Height folded up: approx. 2.5 cm
Height folded up with packing plate: approx. 4 cm
Size installed:
Gap size 2.5 cm - 4 cm
Gap size with packing plate 4 cm – 5,5 cm
Spatial depth (reveal) at least 10 cm
Pressure resistance: Test load > 20,000 N
(equivalent to a load of approx. 2000 kg)
Disposal
The packaging material is recyclable. Dispose of the pack-
aging and the article in an environmentally friendly manner
and take them to a recycling centre.
Z 04117 M DS V1 0717
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Easymaxx Z04117 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Easymaxx Z04117 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info