757310
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
A chronograph combines two time-keeping functions. It incorporates
a device to measure intervals of time independent of the regular time
shown on the dial. Your ESQ by Movado Fusion Chronograph may be
used to time events up to 10 hours in duration, in 1/10 of-a-second
increments.
Setting the Time:
1. Pull crown out to position 2. (Watch will stop.)
2. Turn crown in either direction to move hands to desired time.
Be sure to take AM/PM into account so that date changes at midnight,
not noon.
3. Push crown back in to position 1. (Watch will restart.)
NOTE: To set time to exact second, pull crown out to position 2
precisely when small seconds hand S reaches <<60>> position.
(Watch stops.) Adjust time to one minute ahead, and take an accurate
time signal, from a radio news station, for example. When audible tone
signals exact time, immediately push crown back in to position 1.
(Watch will restart, now set to the exact time.)
Setting the Date (quick change):
1. Use a pin or small pointed tool to press date corrector button V.
Each press and release will advance date indicator hand F by one
increment.
CAUTION: Do not press and hold corrector button V; holding it down
could jam the date mechanism.
NOTE: If the date is adjusted during the automatic date changing phase
(between 9:00 PM and 00:20 AM), set date to following day.
Setting the Time, Date, Day of week and Month:
1. Pull crown out to position 2. (Watch will stop.)
2. Turn crown in either direction to move hands to correct time, making
sure date changes at midnight, not noon. (To set time to exact
second, see “Setting the time”.)
3. Push crown back in to position 1. (Watch will restart.)
NOTE: Each press and release on corrector buttons will advance setting
by one increment:
4. Use corrector button V (on side of case at 8 o’clock) to advance
Date indicator hand F.
5. Use corrector button W (on side of case at 10 o’clock) to advance
Day of week shown in window D.
6. Use corrector button T (on side of case at 2 o’clock) to advance
Month shown in window J.
Chronograph Function Overview
Use buttons A and B to operate the chronograph. Pressing button A
the first time will start the chronograph. While the chronograph is
running, once the chronograph seconds counter hand C has completed
one turn, minute-counter hand E will jump ahead one minute. Tenths-
of-a-second hand G does not move when the chronograph is running.
Pressing button A a second time will stop the chronograph and move
hand G to the relevant tenth-of-a-second mark. Pressing button B will
reset hands G, E and C to zero. Adjusting the time does not stop the
chronograph, but it does block buttons A and B for as long as the
crown is pulled out.
IMPORTANT: Crown must be in position 1 and hands must be at zero
before chronograph is started. Press button B to reset hands to zero.
Do not push button A or B while crown is pulled to position 2. If but-
ton A or B is accidentally activated while crown is not flush against case,
one or more of the chronograph hands will become de-synchronized.
Should this occur, see directions for synchronizing hands at end of
following instructions.
Simple chronograph functions:
To measure the duration of a single, non-stop event:
1. Press button A to start chronograph.
2. Press button A a second time to stop chronograph, and read the
3 chronograph hands to determine elapsed time, for example:
14 minutes, 37 seconds, 5/10 of a second.
3. Press button B to reset chronograph to zero.
Accumulated time functions:
To measure the combined time of a series of shorter events, for
example the actual playing time of a football game, where play is
repeatedly interrupted:
1. Press button A to start chronograph.
Legend
H - Hour hand
M - Minute hand
S - Small seconds hand
F - Date indicator hand
C - Center-mounted chronograph seconds counter
E - Chronograph minutes counter
G - Chronograph tenths-of-a-second counter
(hour counter after 30 minutes)
D - Day of week display
N - Month display
1, 2 - Crown positions
A - Chronograph start/stop push-button
B - Chronograph reset push-button
W - Day corrector button
T - Month corrector button
V - Date corrector button
2
0
1
5
1
0
4
0
3
5
3
0
2
5
2
0
0
6
8
7
6
5
4
3
2
5
3
0
0
5
5
0
5
5
6
0
1
0
1
5
1
2
MON
MAR
E
1
A
B
C
F
G
2
S
Operating Instructions
ESQ FUSION CHRONOGRAPH
HD
W
N
V
M
T
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ESQ Fusion Chronograph bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ESQ Fusion Chronograph in de taal/talen: Engels als bijlage per email.

De handleiding is 0,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info