558588
75
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
75
FURTHER CD PLAYER FUNCTIONS
Repeat function
This function allows you to play an individual track or all the tracks on one CD repeatedly.
To play all the tracks on the inserted CD repeatedly, press the MEMO-UP/REPEAT button
once. REPEAT appears on the display.
To play an individual track repeatedly, press the MEMO-UP/REPEAT button twice while the CD
is playing. REPEAT appears on the display.
To deactivate the repeat function, press the MEMO-UP/REPEAT button again until REPEAT dis
appears from the display.
Mix function
With the mix function, the tracks of the inserted CD are played in random order. To activate this
function, press the MIX button. MIX appears on the display. To deactivate the mix function, press
the STOP or MIX button.
Programmed play function
With the programming function you can compile your own music programme. Before program-
ming, the CD must be stopped by using the STOP button.
Press the MEMORY/PROGRAM button.
To select the required track number, press the SKIP/SEARCH button (forwards or backwards).
Press the MEMO/PROGRAM button again in order to programme the selected track.
Repeat steps 2 and 3 until all the required tracks have been programmed.
Press the PLAY/PAUSE button. MEMO appears on the display.
Press the STOP button in order to end the programmed play function.
Press the MEMO/PROGRAM button and the PLAY/PAUSE button in order to continue using the
programmed play function.
Open the CD compartment or switch the CD player off in order to delete the programmed
track order.
Equaliser function
The music can be played with three different equaliser curves (fl at, classic and rock). Each equa-
liser curve emphasises treble, middle and bass in its own characteristic way. Press the EQ button
to select the required equaliser curve.
USING THE RADIO
Press the TUNER button in order to select the radio mode.
Press the BAND button to select the waveband (AM or VHF/FM).
Start the automatic tuning function by holding the SKIP/SEARCH button (forwards/
backwards) down for 1-2 seconds. When it has located a station, the tuning function stops
automatically. In the case of stations which have a very weak signal the automatic tuning
function does not stop. If a VHF/FM station is received in stereo, this is indicated on the display.
Programming stations
It is possible to programme a maximum of 10 VHF/FM and 10 AM stations, i.e. a total of 20 stations.
When a station with a good reception has been located (see section “Using the radio”), press
the MEMO/PROGRAM button. MEMO/PROGRAM lights up on the display.
Press the MEMO-UP/REPEAT button until the required programme location is displayed.
To store the located station in the selected programme location, press the MEMORY/
PROGRAM button; MEMO/PROGRAM disappears from the display.
Repeat steps 2 to 5 to store further stations. If necessary, change the waveband using the
BAND button.
OPERATING INSTRUCTIONS
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw E-bench KH 350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van E-bench KH 350 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info